Description
44 Space (77") Gangable Rack, 42" Deep, No Rear Door
The LGR gangable rack is UL Listed (Standard 1678) and rated to support up to 3150 lbs. Open frame is welded 16-gauge steel with seamless side-frame construction, a 14-gauge steel bottom, and reinforcements at loadbearing junctures for strength equivalent to 11ga. steel. Each rack frame is beveled front and rear and includes a vented rear door, steel closure panels (for top), removeable knockout panels above/below rear door, panel mounting hardware, and two (2) pair of adjustable rack rails. Finish is black wrinkle powder epoxy.
Features:
- UL rated to support up to 3150 lbs.
- Made in the USA with 100% certified U.S. steel.
- Adjustable Rack Rails: (2-pair RRD-series) tapped 10-32 and im-
- printed with rack unit increments. Clearance from rails to flush outside of frame is 1.75" (2.5" from rail to inside of optional surface-mount front door).
- Front: open front has vents top and bottom for passive ventilation and will accept surface front door (LFD-series, order separately).
- Rear: rack includes recessed, locking rear door that's vented at top and bottom. Removable knockout panels above and below
- rear door.
- Top: open top features 6"D rear conduit plane with knockouts for
- conduit: three (2"-1"), two (1.5"-1"), plus room to use a Greenleestyle punch for 4" conduit. Top also features six (0.5") knockouts for BNC style wireless antennas. Three flush solid steel panels (3U, 4U, and 10U) are included to close the 17U opening in top. Solid steel panels can be replaced with 19"W fan panels (order separately).
- Bottom: 14-gauge steel bottom with full-size opening accommodates large cable bundles. Vertical array of 2" holes and 4" x 1.5" openings front-to-rear along rack bottom assist cabling between racks. Includes grounding stud, provisions for optional leg levelers (order separately) and holes for optional anchor bolts (by others). Will accept optional stationary or mobile platform base (order separately).