Skip to content

FREE USA Shipping $49+!

RapcoHorizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10')

RapcoHorizon SKU: HOR NM110
MPN: NM1-10 UPC: 765811355021

Price:
Sale price$20.71
Stock:
60 In Stock & Ready to Ship

Key Features

  • 10 ft. (3.0 m) Cable Length
  • Neutrik XX Series XLR Connectors
  • Heavy Duty PVC Jacket
  • Flexible Yet Durable
  • Very Low Cable Memory
  • Individually Tested

Description

RapcoHorizon NM1-10, 10-foot balanced XLR microphone cable

The RapcoHorizon NM1-10 is a finished 10-foot balanced microphone cable with Neutrik 3-pin XLR female and male connectors with silver contacts. Two 24-AWG copper conductors, a spiral copper shield and a flexible matte PVC jacket provide a practical connection for compatible microphones and balanced analog audio equipment.

Other lengths with Neutrik XLR connectors: 1 ft · 2 ft · 3 ft · 6 ft · 15 ft · 25 ft · 50 ft · 75 ft · 100 ft.

Check connections and routing

The female cable end mates with a typical microphone's male XLR output; the male cable end mates with a mixer, preamp or interface's female XLR input. Check both devices' signal requirements. This carries one balanced mono analog signal, not a stereo pair, and is not a speaker cable or purpose-specified AES/EBU or DMX cable. Allow length for routing, connector access and service slack.

Construction and handling

MIC1.K cable uses bare copper conductors and a bare annealed copper serve shield with 95% coverage. Its flexible, low-memory matte PVC jacket helps routing and coiling. Shielding supports noise control without guaranteeing elimination of hum or interference. The listed connector types are Neutrik NC3FXX and NC3MXX-style. Release the latch where applicable and grip the connector body, not the cable, when disconnecting.

Features

  • Finished 10-foot male-to-female 3-pin XLR cable with Neutrik silver-contact connectors.
  • Two 24-AWG copper conductors and flexible copper serve shield.
  • 95% shield coverage.
  • Flexible, durable, low-memory matte PVC jacket.
  • Individually tested for performance and quality.

Specifications

  • Model: NM1-10; length: 10 feet.
  • Cable: MIC1.K; conductors: two 24 AWG.
  • Shield: bare annealed copper serve, 95% coverage.
  • Jacket: matte PVC; outside diameter: 0.230 inch.
  • Listed capacitance: 21 pF/ft at 1 kHz.
  • Conductor-to-shield capacitance: 37 pF/ft at 1 kHz.
  • Nominal characteristic impedance: 70 Ω.
  • DC resistance at 20°C: 23 Ω/1,000 ft.

Other configurations

The broader series offers other lengths, colors and connector brands; additional lengths are available upon request. These are separate configurations. Confirm the required configuration and availability before ordering an alternative.

Details
  • Manufacturer:  RapcoHorizon
  • MPN: NM1-10
  • Model Number: NM1-10
  • UPC: 765811355021

You may also like

Recently viewed