Lowell ACSP-2002-RPC-HW Surge Suppressor up to 72,000A

Compac Surge Suppressor with Remote Power Control, Hardwired, 20A, 2 Outlets

This advanced surge suppressor provides the highest current capacity available in devices of its size to protect multiple pieces of sensitive electronic equipment on a single circuit. It features industrial strength "zero failure" technology backed by a ten year warranty. It also includes a patented* rotating outlet plate that makes it easy to change the position of the outlets from top to side access. The compact body has a very low profile (1.75"H x 6"D x 9"W) and includes two mounting brackets to promote easy instal- lation - on a wall behind a flat panel TV, under a counter, in a rack or just about anywhere. Terminates to 6-ft. non-metallic flexible whip that can be field-cut to shorter lengths.

Model ACSP-2002-HW: features (2) 20A outlets (1 duplex)

Model ACSP-2002-VTE-HW: features (2) 20A outlets (1 du- plex) and VTE over/under protection that automatically turns receptacles off when line voltage drops below 100V or rises above 140V.

Model ACSP-2002-RPC-HW: features (2) 20A outlets and remote power control capability by a low voltage sequencer, switch or control system that provides a maintained dry contact closure.

Model ACSP-2002-IG-HW: features (2) 20A insulated ground outlets (1 duplex).

Model ACSP-2002-IG-VTE-HW: features (2) 20A insulated ground outlets (1 duplex) and VTE over/under protection that automatically turns receptacles off when line voltage drops below 100V or rises above 140V.

Model ACSP-2002-IG-RPC-HW: features (2) 20A insulated ground outlets and remote power control capability by a low voltage sequencer, switch or control system that provides a maintained dry contact closure.

Model ACSP-2002-GTF-HW: features (2) 20A insulated ground outlets (1 duplex) plus a ground transient filter. The patented GTF technology filters potentially damaging electromagnetic transients/noise on the ground wire. The GTF installs in series with the ground line of electrical circuits to attenuate high frequency transients without impeding 60Hz fault current. It introduces less than 0.1 ohm at 60Hz to the ground circuit thereby assuring proper operation of any and all overcurrent protection devices (circuit breakers, fuses, etc.). The GTF provides significant attenuation at higher frequencies where the most damaging transients exist. At 1MHz, for example, the GTF attentuates ground noise by 25dB which can be the difference between a sensitive system functioning continuously or having an interruption or "reset" occurence.

Features:

• ETL Listed, ANSI C62.41 Compliant, conforms to UL1449-3 Low-profile chassis (1.75"H x 6"D x 9"W)
• Rotating outlet plate that rotates 90o for front or side access. LEDs provide visual system status
• Suppresses line to neutral with no ground contamination.
• TCR technology defeats surges up to 72,000 amps with zero failures
• Two mounting brackets allow versatile installation. (Optional mounting ears are available if standard 19" rackmount installation is preferred.)
• Terminates to 6-ft. non-metallic flexible whip 10 year warranty

Specifications:

• Suppresses line to neutral with no ground contamination.
• TCR technology defeats surges up to 72,000 amps
• Two (20A) NEMA outlets spaced for power supplies. Patented plate rotates 90 degrees for front or side access.
• Front LEDs provide visual system status.
• Universal mounting brackets allow versatile installation.
• 6-ft. non-metallic flexible conduit with pigtail leads for hardwired connection.
• Chassis: 1.75 in. x 6 in. x 9 in.
• Remote Power Control (RPC) capability by a low voltage sequencer, switch or control system that provides a maintained dry contact closure.
• 10 year warranty
• COMPLIANCE & CERTIFICATION
• ETL Listed
• Conforms to UL1449-4
• ANSI C62.41 Compliant