Description
4-Channel Direct Box, 1 RU
The Whirlwind MultiDirector is a four channel rack mount version of the popular DIRECTOR direct box. It uses the same high quality components to faithfully reproduce the sound of any instrument with the utmost in sonic clarity. The unit is a passive transformer isolated DI that needs no batteries and will provide years of dependable service.
Features:
- INPUT: Each of the four individual channels has three standard 1/4" unbalanced, high impedance bridging jacks for connection to instruments and amplifiers. All are wired in parallel and can be used in any combination for input and through connections. Two are located on the rear panel with the third on the front.
- OUTPUT: A three pin male XLR low impedance output is provided for each channel to connect the DI to the sound board microphone input. Pin 2 is wired in phase with the tip of the 1/4" input.
- GROUND LIFT SWITCH: In the lift position, the input ground is disconnected from pin 1 of the output XLR. This can be very useful for eliminating buzz and hum between onstage equipment and the PA system.
- PAD SWITCH: When switched to the in position, a 20dB pad is inserted across the input. This attenuates very hot input signals such as amplifier speaker outputs or some keyboards. The pad only affects the balanced XLR output.
Specifications:
- Frequency Response: 20 to 20k Hz. +/- 1dB
- Input Impedance: 20 KΩ
- Output Impedance: 150 Ω
- Signal Loss (I/O): - 20 dB, (- 40dB pad in)
- Dimensions: 19"W (482.6mm), 1.75"H (44.5mm), 5.25"D (133.4mm)
- Shipping Weight: 6.5 lbs. (2.95kg)
- Unit Weight: 5.0 lbs. (2.27kg)