Dual Shure SM7B Microphones and a 2-Person Cloudlifter with Boom Arms and Cables

Shure SM7B Vocal Microphones (2 Included)

Shure's SM7B has been a mainstay in the professional audio industry for decades and is used regularly for radio broadcasts, voice over work, and vocals from rock to pop and everything in between. You can also use this mic on guitar cabs and snare drums if you're after a 'fatter' sound than what your typical dynamic microphone will allow.

The SM7B is a professional utilitarian microphone at a staggeringly affordable price. Recording professionals across the globe turn to this mic for its reliable performance and complimentary tone.

The SM7B dynamic microphone has a smooth, flat, wide-range frequency response appropriate for music and speech in all professional audio applications. It features excellent shielding against electromagnetic hum generated by computer monitors, neon lights, and other electrical devices. The SM7B has been updated from earlier models with an improved bracket design that offers greater stability. In addition to its standard windscreen, it also includes the A7WS windscreen for close-talk applications.

SM7B Includes foam windscreen, close-talk windscreen, locking yoke mount.

Cloud Microphones Cloudlifter CL-2 Mic Activator

Active Ultra-Clean Gain

Provides two channels of up to +25dB of ultra-clean gain and optimal impedance loading for dynamic and ribbon mics to perform their best.

Plug & Play

Simply connect one or two dynamic or ribbon mics to the input and connect a mixer or preamp to the output. Great for two mono channels or a stereo configuration.

Phantom Powered

Turns Phantom Power into gain and clarity without passing it through to your delicate ribbon mic.

Reduce Feedback

The Cloudlifter allows you to cut through the mix on stage with increased gain before feedback.

Premium Electronics

The Cloudlifter's discrete JFET circuitry preserves the source's natural sound while keeping the direct audio path clear of transformers, capacitors, and resistors.

Made in the USA

Rugged, road-ready, and portable. Manufactured responsibly in the USA. Free lifetime limited warranty.

Cloudlifters are an essential tool for any audio scenario.

Recording into a DAW interface, performing live on stage, producing a podcast, using long cable runs in the studio, miking soft sound sources and using noisy or low gain preamps are just a few of its many uses.

Horizon NM1-10 Microphone Cables with Neutrik XLR Connectors (10', 2 Included)

The RapcoHorizon 10 Foot XLR Male to XLR Female cable is made from a dual conductor 24 gauge copper cable utilizing a spiral copper shielding. In addition it features Neutrik NC3FXX and NC3MXX style Nickel connectors with the use of silver contact pins. This 10ft length is commonly recommended with any pro audio applications that will need a patch from one particular component to another one. It'll give you a tough and reliable connection all the while sustaining the purity of the audio signal.

This series uses (2) 24 gauge bare copper center conductors and a serve shield for quiet operation. The outer jacket is a durable and flexible matte PVC compound. Available with alternate choices of connector brands to meet different preferences and price points.

Available in black, blue, green, purple, red, and white. Neon colors available are neon blue, neon green, neon orange, neon pink, and neon yellow.

Common lengths (in feet): 1, 2, 3, 6, 10, 15, 20, 25, 30, 50, 75, 100. Other lengths available upon request.

Rode PSA1 Studio Boom Arms (2 Included)

The PSA1 is a studio boom arm for radio, broadcast, studio and home use.It provides full 360 degree rotation.

The PSA1 has a horizontal reach of 820mm, and a vertical reach of 840mm. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for verstile mounting in desks up to 55mm thick (clamp) or 70mm (insert).

Designed for the Rode Procaster and Podcaster, the PSA1 supports most microphones weighing between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount.

Please note that the PSM1 shock mount is sold separately.

Features:

Shure SM7B Vocal Microphones (2 Included)
Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech
Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting
Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors
Internal "air suspension" shock isolation virtually eliminates mechanical noise transmission
Highly effective pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration
Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals
Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone position
Classic cardioid polar pattern, uniform with frequency and symmetrical about axis, to provide maximum rejection and minimum coloration of off-axis sound
Rugged construction and excellent cartridge protection for outstanding reliability
Replacement cartridge: RPM106
Cloud Microphones Cloudlifter CL-2 Mic Activator
Gives passive mics up to +25 dB additional active output
Provides 2 distinct stages of clean gain
Easy to use self-contained design requires only phantom power
Recommended for use with all passive dynamic microphones
Compatible with tube, battery, or power supply driven microphones
Safe for all passive ribbons with no transfer of phantom
Utilizes Patent Pending Class A, Discrete JFET circuitry
Ideal impedance loading for optimal performance @ 3 kOhms
Rugged, road ready, and portable, for studio, stage, and broadcasting
Horizon NM1-10 Microphone Cables with Neutrik XLR Connectors (10', 2 Included)
(2) 24 gauge center conductors
Utilizing a serve shield process for quiet operation yielding maximum flexibility
Matte jacket PVC material is very flexible yet durable with very low memory
Pure copper conductor and shield
Connector brand options available to meet various preferences and price points: RapcoHorizon, Amphenol, Neutrik, or Switchcraft
Individually tested for performance and quality
Rode PSA1 Studio Boom Arms (2 Included)
Includes 3/8" adapter
32" (820mm) Horizontal Reach
33" (840mm) Vertical Reach
Holds up to 4.4 lbs (2 kg)
Includes two desk mounting options
Dual-axis swivel mount for accurate positioning

Specifications:

Shure SM7B Vocal Microphones (2 Included)
Type: Dynamic
Frequency Response: 50 to 20,000 Hz
Polar Pattern: Cardioid (unidirectional)
Impedance: Microphone impedance rating is 150 ohms (150 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms.
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3.
Output Level (at 1,000 Hz):
Open Circuit Voltage*: -59.0 dB (1.12 mV)
*0 dB = 1 volt per Pascal
Electromagnetic Hum Sensitivity (Typical, Equivalent SPL/milliOersted):
60 Hz: 11 dB
500 Hz: 24 dB
1 kHz: 33 dB
Switches: Bass rolloff and mid-range emphasis: Slotted response selector switches. See Figure 3 in User Guide for bass rolloff and mid-range emphasis (presence boost) response.
Cartridge Shock Mount: Internal air-suspension shock and vibration isolator.
Microphone Connector: Three-pin professional audio (XLR)
Swivel Assembly: Integrated, captive nut for ease of attachment to stand, fits 5/8 in.-27 thread.
Case: Dark gray enamel aluminum and steel case with dark gray foam windscreen.
Dimensions: See User Guide
Net Weight: 765.4 grams (1 lb, 11 oz)
Cloud Microphones Cloudlifter CL-2 Mic Activator
I/O:
2x XLR input
2x XLR output
Input Impedance: 3 kOhms
Gain: +25 dB
Horizon NM1-10 Microphone Cables with Neutrik XLR Connectors (10', 2 Included)
Cable: MIC1.K
Conductor Gauge: (2)24 gauge
Shield: Bare annealed copper serve
Shield Coverage: 95%
Jacket: Matte PVC
O.D.: 0.230"
Capacitance: 21 pF/ft. @ 1 kHz
Cond.-Shield Capacitance: 37 pF/ft. @ 1 kHz

Includes:

(2) Shure SM7B Vocal Microphones
(1) Cloud Microphones Cloudlifter CL-2 Mic Activator
(2) Horizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10 Foot)
(2) Rode PSA1 Studio Boom Arm

Shure Dual SM7B Microphones and 2-Person Cloudlifter Broadcast Bundle

Key Features

Description