Key Features
- Video Distribution with 4 Outputs
- 75 Ohm BNC Connections
- Adjustable Gain Amplification
- Input Loop Out Jack
- Video 1 Volt Signal Indicator
- 10 MHz Bandwidth, NTSC or PAL
- 1/3-Rack, High-Density Rack Mounting
Description
NTSC/PAL Video Distribution Amplifier - 1x4 - BNC
The RU-VDA4 is the ideal choice in most applications where video signals need to be distributed. Video inputs and outputs are made on the front panel via BNC, PHONO, or type F jacks. Power connections are made using full-size barrier block terminals on the rear panel.
The RU-VDA4 has two jacks in the input stage. One jack is for the input signal; the other is a loop through output of the source signal.The input stage is bridging. If 75 Ω termination of the input signal is required, the termination is plugged onto the LOOP OUT jack.
Gain is user adjustable from the front panel. The GAIN potentiometer allows adjustment from -1 dB to +7 dB.
Features:
- Video Distribution with 4 Outputs
- Adjustable Gain Amplification
- Input LOOP OUT Jack
- Video 1 Volt Signal Indicator
- 10 MHz Bandwidth, NTSC or PAL
- 1/3-Rack, High-Density Rack Mounting
Specifications:
- Input: 1 kΩ bridging 75 Ω line
- Gain: -1 dB to +7 dB (0.9 to 2.25 V p-p, adjustable)
- Outputs: 1 LOOP OUT from input signal; 4 amplified outputs
- Output Level: 1 V p-p into 75 Ω
- Frequency Response: 10 Hz to 10 MHz (+/- 0.2 dB)
- Noise: < -70 dB below (1 V p-p)
- Output Isolation: > 40 dB
- Differential Gain: 0.1%
- Differential Phase: 0.1 degree (measured at 10% and 90 APL)
- Connector Type: BNC, PHONO, or Type F
- Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 60 mA
- Ambient Operating Environment: 0 C to 55 C