Key Features
- Water and Dust Resistant
- Crushproof Solid Wall Design
- Automatic Pressure Equalization Valve
- Double-Throw Latches
- Padlock Protectors
- Corrosion Resistant Stainless Steel
- Retractable Extension Handle
- Polyurethane Wheels
- Open Cell Pick N Pluck Foam
- Temperature Range: -40 to 210°F
Description
Waterproof Protector Mobility Case with Foam - Black
The 1560M Case from Pelican is an airtight, crushproof, dust and water resistant hard case for use in rugged terrain. It includes a mobility kit which adds a retractable extension handle and a built-in dolly system with 4" polyurethane wheels and stainless steel ball bearings. You can travel knowing that your gear inside this case is protected thanks to its solid polypropylene walls and watertight polymer o-ring seal. An automatic purge valve allows you to open the case after changes in atmospheric pressure at any altitude, making it suitable for air travel. The double-throw latches on the side of the case can withstand almost 440 lb of pressure, yet allow you to open and close the case with a light push or pull. The Pick N Pluck foam inside the case allows you to custom fit your gear into the large compartment of the case. Stainless steel hardware and padlock protectors prevent corrosion while providing extra strength against theft.
Features:
- Retractable extension handle
- 4" diameter x 1.5" wide (10.2 x 3.8cm) heavy duty polyurethane wheels with stainless steel bearings
- Easy open Double Throw latches
- Open cell core with solid wall design - strong, light weight
- O-ring seal
- Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
- Comfortable rubber over-molded top and side handles
- Stainless steel hardware and padlock protectors
- Lifetime Guarantee of Excellence
- Water resistant, crushproof, and dust resistant
Specifications:
- INTERIOR (L X W X D): 19.92" x 14.98" x 9.00" (50.6 x 38 x 22.9 cm)
- EXTERIOR (L X W X D): 23.78" x 18.33" x 12.08" (60.4 x 46.6 x 30.7 cm)
- BODY: Polypropylene
- LATCH: ABS
- O-RING: Polymer
- PINS: Stainless Steel
- FOAM: 1.3 lb Polyurethane
- PURGE BODY: ABS
- PURGE VENT: 3 Micron Hydrophobic Non-Woven
- PURGE O-RING: 70 Shore Nitrile
- LID DEPTH: 2.00" (5.1 cm)
- BOTTOM DEPTH: 7.00" (17.8 cm)
- TOTAL DEPTH: 9" (22.9 cm)
- INT VOLUME: 1.55 ft³ (0.044 m³)
- WEIGHT WITHOUT FOAM: 21.30 lbs (9.7 kg)
- MINIMUM TEMPERATURE: -40° F (-40 ° C)
- MAXIMUM TEMPERATURE: 210° F (99 ° C)
- WHEELS: 2
- EXTENDABLE HANDLE: yes
- CERTIFICATIONS: IP57