Neumann TLM 107 Studio Set Studio Mic with Shock Mount (Black)

NeumannSKU: NMN TLM107STUDIOSETB

Price:
Sale price$1,595.00
Stock:
Out of Stock, But We'll Ship It Fast!

Key Features

  • Includes EA 4 Elastic Suspension
  • Transformerless Circuitry
  • 5 Polar Patterns with Back-Lit Display
  • Low Self-Noise
  • Withstands High SPL
  • 2 Selectable High-Pass Filters
  • 2 Selectable Pads
  • LED Indicators with Auto-Dimming
  • Navigation Switch

Description

Multi-Pattern Large-Diaphragm Studio Condenser Microphone with EA 4 Elastic Suspension - Black

With five directional characteristics and a novel operating concept, the TLM 107 captures sound without any compromises. Featuring impressive level handling and low self-noise, it clearly captures everything from the softest whisper to loud, thundering drums. Its extensive performance spectrum and high-precision reproduction allows for limitless possibilities in mixing and post-production. With its classic proportions and fresh, modern design, it perfectly embodies the Neumann philosophy: innovation based on tradition.

Neumann Engineering
The TLM 107 produces optimal sound not only in the cardioid setting, but in all of the other directional characteristics as well. The sound always remains balanced, with an almost linear reproduction of up to 8 kHz, and a slight boost in the highest frequencies that lends presence and freshness to the voice. The grille is acoustically optimized for low sensitivity to harsh "p" and "s" sounds. In addition, the capsule is edge-terminated, with both diaphragms at ground voltage. This ensures considerably reduced sensitivity to dust and humidity.

No-Compromise Sound Design
Transformerless circuitry in the TLM 107 permits a high degree of linearity and a large dynamic range. It allows for high-level handling while simultaneously featuring a self-noise of only 10 dB-A. The low cut linear, 40 Hz, and 100 Hz settings are intended for standard recording situations. The maximum sound pressure level of 141 dB SPL can be increased to 153 dB SPL via pre-attenuation, which enables the TLM 107 to transmit the sound of even the loudest instruments without distortion.

Innovative Operating Concept
All of the TLM 107's switch functions are controlled intuitively via a navigation switch. It features an illuminated pattern display in the chrome ring and an LED display to the left and right of the switch that indicates pad and low cut status. After ten seconds, the display automatically turns off.

Features:

  • Low self-noise of 10 dB-A
  • Maximum sound pressure level of 141 dB SPL, can be increased to 153 dB SPL with pad
  • Low cut and pad are controlled via navigation switch
  • Pad and low cut status displayed by LED indicators
  • Illuminated polar pattern display
  • Indicator light displays are turned off automatically after 15 seconds

Specifications:

  • Transducer Type: Pressure gradient transducer
  • Directional Pattern: Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8
  • Frequency Range: 20 Hz to 20 kHz
  • Sensitivity: 11 mV/Pa (@ 1 kHz into 1 kohm)
  • Impedance: 50 ohms
  • Load Impedance: 1 kohms
  • Equivalent Noise Level:
    22 dB (CCIR)
    10 dB-A (A-weighted)
  • Signal-to-Noise Ratio:
    72 dB (rel. 94 dB SPL, CCIR)
    84 dB (rel. 94 dB SPL, A-weighted)
  • Maximum SPL:
    141 dB (THD 0.5%)
    147 dB (THD 0.5%, with preattenuation -6 dB)
    153 dB (THD 0.5%, with preattenuation -12 dB)
  • Output Voltage: 10 dBu (THD < 0.5 %)
  • Power Supply: P48 (IEC 61938)
  • Current Consumption: 3.2 mA
  • Connects To: XLR 3 F
  • Diameter: 2.5" (64 mm)
  • Length: 5.7" (145 mm)
  • Weight: 445 g (15.7 oz)

Includes:

  • TLM 107 bk Microphone
  • EA 4 bk Elastic Suspension
  • Carton Box

You may also like

Recently viewed