Key Features
- Transformerless Circuitry
- 5 Polar Patterns with Back-Lit Display
- Low Self-Noise
- Withstands High SPL
- Two Selectable High-Pass Filters
- Two Selectable Pads
- LED Indicators with Auto-Dimming
- Navigation Switch
Description
Multi-pattern Large-Diaphragm Studio Condenser Microphone - Nickel
The nickel Neumann TLM 107 is a high-quality, flexible large diaphragm condenser microphone with five selectable polar patterns that is designed to accommodate a wide variety of professional studio, broadcast and demanding home recording applications.
The TLM 107 is engineered with a transformerless design that permits a high degree of linearity and a large dynamic range. Featuring selectable omnidirectional, wide angle cardioid, cardioid, hypercardioid and figure-8 polar patterns, this microphone is suitable for a wide range of miking techniques and configurations.
The mic also features -6dB and -12dB pads that can be engaged for recording louder sound sources such as brass or guitar amplifiers. Additionally, it has selectable high-pass filters at both 40Hz and 100Hz for filtering out unwanted low frequencies to save your work in the mix.
Features:
- Low self-noise of 10 dB-A
- Maximum sound pressure level of 141 dB SPL, can be increased to 153 dB SPL with pad
- Low cut and pad are controlled via navigation switch
- Pad and low cut status displayed by LED indicators
- Illuminated polar pattern display
- Indicator light displays are turned off automatically after 15 seconds
Specifications:
- Transducer Type: Pressure gradient transducer
- Directional Pattern: Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8
- Frequency Range: 20 Hz to 20 kHz
- Sensitivity: 11 mV/Pa (@ 1 kHz into 1 kohm)
- Impedance: 50 ohms
- Load Impedance: 1 kohms
- Equivalent Noise Level:
22 dB (CCIR)
10 dB-A (A-weighted) - Signal-to-Noise Ratio:
72 dB (rel. 94 dB SPL, CCIR)
84 dB (rel. 94 dB SPL, A-weighted) - Maximum SPL:
141 dB (THD 0.5%)
147 dB (THD 0.5%, with preattenuation -6 dB)
153 dB (THD 0.5%, with preattenuation -12 dB) - Output Voltage: 10 dBu (THD < 0.5 %)
- Power Supply: P48 (IEC 61938)
- Current Consumption: 3.2 mA
- Connects To: XLR 3 F
- Diameter: 2.5" (64 mm)
- Length: 5.7" (145 mm)
- Weight: 445 g (15.7 oz)