Doug Fleenor ES2 Entry Station Two

Two Button Entry Station (Used as a Slave to Preset 10, Preset 10-A2, and Rerun)

The Entry Station Two is a stand-alone DMX snapshot recorder which can store two preset scenes or "looks". It can be used as a stand-alone main station or configured as a remote station in conjunction with another ES2 configured as a main station. It can be used as a remote station with Doug Fleenor Design's Preset 10-A, Preset 10-A2, or Rerun stations.

In remote mode, the ES2 has two buttons which can be assigned to remotely trigger any of the presets/shows on a master station. There is also a recessed button which is used to record presets and to set fade times when the ES2 is configured as a main station.

Specifications:

• Connector:
  Phoenix Contact MSTB series 5 position two part terminal block
  Model: MSTB 2,5/5-ST-5,08 Order Number 17 57 04 8
• Connector pin out:
  1 (C) DMX512 common
  2 (-) DMX512 data -
  3 (+) DMX512 data +
  4 (C) Supply common (internally tied to pin1)
  5 (V) Supply voltage "hot"
• Input/Output circuit: ESD protected EIA-485 transceiver (LT1785)
• Indicators:
  Two green preset indicator LEDs
  One bi-color Lockout (red), Time (yellow) & Inactive (green)
• User controls: Two preset push buttons
• Option jumpers: When removed sets preset button address
• Power input:
  9 to 24 volts DC or 6 to 16 volts AC / 200mA per station
  (A 10 volt class 2 "doorbell" transformer is recommended for fixed installations)
• Color: Black Anodized, With Silver Engraved Nomenclature
• Size:
  Face Plate: 4.5"h x 2.75"w x 0.2"d
  Face Plate Rear Inset: 4.15"h x 2.4"w x 0.1"d
  Electrical Box Minimum Inside Dimensions: 3.5"h x 2.1"w x 1.25"d