Skip to content

FREE USA Shipping $49+!

Custom Cables Dual RCA to RCA Analog Audio Cable Made from Mogami W2528 & Premium Connectors

Custom Cables SKU: CUS DUALRCA 2528
MPN: CUSTOM DUAL RCA 2528

Price:
Sale price$20.00
Stock:
Custom Made to Order

Key Features

  • Mogami 2528 Dual Channel Cable
  • Genuine Neutrik or Canare Connectors
  • Lifetime Warranty
  • Custom Labeling Available
  • Finishing Options
  • Custom Made to Order

Description

Custom Dual RCA to Dual RCA Audio Cable with Mogami W2528

Keep left and right analog audio connections together in one organized run. Performance Audio builds this finished assembly to order using Mogami W2528 dual-channel cable and genuine Neutrik or Canare connectors. Connect compatible RCA outputs and inputs as a stereo pair, or use the two paths for separate unbalanced mono signals.

Built for Your Setup

  • Mogami W2528 dual-channel cable.
  • Two RCA connections at each end.
  • Genuine Neutrik or Canare connectors, according to your selected build options.
  • Black cable.
  • Custom labeling and finishing options.
  • Finished cable assembly made to order, not bulk wire.
  • Lifetime warranty.

Two Mono Paths or One Stereo Pair

Each RCA-to-RCA path carries one unbalanced mono signal. Use both paths for the left and right sides of compatible analog audio connections on playback equipment, mixers, audio interfaces, or other devices. For two unrelated mono signals, identify each path consistently at both ends. The cable does not combine channels, duplicate one signal onto both paths, or convert mono to stereo.

Connect equipment outputs to suitable receiving inputs. The cable does not establish signal direction, and it should not be used to join two outputs together.

Check Port Type and Signal Level

Confirm that the RCA sockets carry compatible analog audio. RCA connectors are also used for coaxial digital audio and video; matching connectors alone do not establish compatibility. This analog assembly does not convert digital audio to analog and is not a specified 75-ohm coaxial S/PDIF or video cable.

Check the source output level and the receiving input requirements. This cable does not convert consumer and professional operating levels, provide impedance matching, or add transformer isolation. It is not a balanced audio connection or a speaker-power cable.

Turntable and Phono Connections

A turntable's phono-level output requires an appropriate phono preamplifier unless the turntable or receiving equipment already provides one. This cable does not supply phono gain or equalization. Confirm the turntable manufacturer's cable-capacitance and grounding requirements before choosing a custom length. If a separate ground lead is needed, discuss it with our specialists rather than assuming one is included.

Plan the Main Run and Branch Reach

Measure the actual route between devices, including bends and service slack. Check how far apart the two RCA jacks are at each end and allow enough separated lead length to reach without pulling on the plugs. Confirm branch lengths, connector style, and how the finished length is measured with our custom cable specialists when the layout is critical.

Organize Channels and Labels

Label the two paths for left/right, channel numbers, or equipment names, keeping assignments consistent from end to end. Custom labeling and available finishing options can make setup and troubleshooting easier. Discuss connector color coding where available; verify channel assignments rather than assuming colors establish the wiring or signal direction.

Routing and Noise Considerations

Keep unbalanced audio runs as short as practical for the setup and route them away from AC power wiring, transformers, and other interference sources. Cable choice alone does not eliminate ground loops or make a long unbalanced run equivalent to a balanced connection. If hum, noise, or a long route is a concern, ask about an appropriate interface or isolation solution for the equipment.

Handling and Testing

Lower monitoring levels or mute the affected channels before connecting or disconnecting. Handle connectors by their bodies, avoid sharp bends and crushing, and support the cable so the branches do not strain equipment sockets. Coil loosely for storage.

Test both paths with the intended equipment before a session or event. Check left/right or channel assignments, suitable levels, secure fit, and clean audio without hum, crackles, or intermittent connections. Recheck the routing after moving equipment.

Customization Help

Call or email Performance Audio's custom cable specialists with your equipment models, port functions, required length, branch reach at each end, connector preferences, and labeling or finishing requests. If the online options do not cover your layout, confirm a custom build, pricing, and the timeline before ordering.

Details
  • Manufacturer:  Custom Cables
  • MPN: CUSTOM DUAL RCA 2528
  • Model Number: Custom Mogami W2528 Dual RCA Cable

You may also like

Recently viewed