Skip to content

FREE USA Shipping $49+!

Custom Cables Bantam TT to 1/4" TRS Patch Cable Made from Canare L-4E5C & Neutrik Connectors

Custom Cables SKU: CUS BANTAMTRS L4E5C
MPN: CUSTOM TT-TRS L-4E5C

Price:
Sale price$10.00
Stock:
Custom Made to Order

Key Features

  • Canare L-4E5C Mini Star Quad Mic Cable
  • Genuine Neutrik Connectors
  • Lifetime Warranty
  • Available in 4 Colors
  • Custom Labeling Available
  • Finishing Options
  • Custom Made to Order

Description

Custom Bantam TT to 1/4" TRS Patch Cable with Canare L-4E5C

Connect a compatible Bantam TT patchbay to equipment with a 1/4" TRS connection using a cable built for your studio layout. Performance Audio makes this finished assembly to order with Canare L-4E5C Mini Star Quad microphone cable and genuine Neutrik connectors, bridging the two connector formats without a separate adapter.

Wire Choices

Choose the cable listing before configuring your build.

Built for Your Setup

  • Canare L-4E5C Mini Star Quad microphone cable.
  • Bantam TT to 1/4" TRS format with genuine Neutrik connectors.
  • Available in four cable colors.
  • Custom labeling and finishing options.
  • Finished assembly made to order, not unterminated bulk wire.
  • Lifetime warranty.

Match the Patchbay and Equipment Ports

TT, 1/4" phone, and 3.5mm plugs are different sizes and are not interchangeable. Confirm a Bantam TT port at one end and a 1/4" TRS port at the other. For conventional balanced analog wiring, this assembly carries one mono signal, not a stereo pair. Cable construction does not add independent audio channels.

A TRS socket can carry balanced mono, stereo headphones, or an insert send/return. Confirm both port functions and wiring. This is not an insert breakout or stereo-to-mono adapter; it does not convert levels, provide microphone preamplification, or add isolation.

Check Signal Level and Wiring

Match a compatible output and input, checking microphone versus line level, polarity, and grounding against the equipment and patchbay manuals. Have nonstandard wiring or unbalanced connections reviewed before ordering. This analog assembly is not a speaker-power cable or a guaranteed AES/EBU digital connection.

Understand Your Patchbay's Normaling

Identify source and destination rows and whether the points are fully normalled, half-normalled, or non-normalled. Insertion may interrupt an existing route or create an additional feed depending on the bay and jack used. The cable does not change normaling. Avoid output-to-output connections and feedback loops; for additional feeds, confirm that the source can drive the combined input load.

Phantom Power and Repatching

Mute the affected path or reduce monitoring levels before repatching. Confirm that the bay, wiring, and equipment are suitable before routing phantom-powered microphone signals. Phone-style contacts can make unintended temporary connections during insertion or removal. Disable phantom power and allow discharge according to the equipment instructions before repatching microphone paths. Keep it away from incompatible line outputs and unbalanced devices; not every TT bay is suitable for phantom-power routing.

Plan Length and Connector Clearance

Measure the actual route with service slack and gentle bends. Check closely spaced jacks and rack-panel clearance; avoid excess loops across controls or walkways. Support the cable so its weight does not pull on sockets. Confirm special connectors, unusual routing, or nonstandard wiring with our specialists before ordering.

Colors, Labels, and Finishing

Use the four available colors to distinguish signal groups. Custom labels can identify equipment, patch points, channels, or source and destination assignments. Discuss available labeling and finishing options for your build.

Handling and Testing

Handle plugs by their bodies, not the cable. Avoid sharp bends, crushing, and connector strain; coil loosely and protect clean plugs. Test the complete route with the intended equipment before a session: check continuity, channel assignment, normaling, levels, and clean audio without hum, crackles, or intermittent connections. Recheck routing after equipment changes.

Customization Help

Call or email Performance Audio's custom cable specialists with your equipment and patchbay models, port functions, signal levels, wiring, length, color, and labeling or finishing requests. Confirm build details, pricing, and the timeline before ordering if you have a deadline.

Details
  • Manufacturer:  Custom Cables
  • MPN: CUSTOM TT-TRS L-4E5C
  • Model Number: Custom Canare L-4E5C TT-TRS Cable

You may also like

Recently viewed