Skip to content

FREE USA Shipping $49+!

Custom Cables 2-Channel Audio Snake Made from Mogami W2930 & Neutrik Connectors (Config per Side)

Custom Cables SKU: CUS SNAKE2CHEASY
MPN: CUSTOM 2CH SNAKE EASY

Price:
Sale price$30.00
Stock:
Custom Made to Order

Key Features

  • Mogami 2930 2-Channel Snake Cable
  • Genuine Neutrik Connectors
  • Lifetime Warranty
  • Custom Labeling Available
  • Finishing Options
  • Custom Made to Order

Description

Custom Mogami W2930 2-Channel Audio Snake, Configured per Side

Keep two audio connections together in one organized cable run, with straightforward configuration at each end. Custom built to order by Performance Audio using Mogami W2930 audio snake cable and genuine Neutrik connectors, this assembly offers preconfigured XLR and 1/4" TRS arrangements for each side to suit your studio, rack, or live-sound setup.

Built for Your Connections

  • Cable: Mogami W2930 2-channel audio snake cable.
  • Connectors: Genuine Neutrik connectors, with XLR and 1/4" TRS options.
  • Configuration: Select a preconfigured connector arrangement for each side of the cable, rather than selecting connectors individually for each channel.
  • Custom build: Finished cable assembly made to order, not unterminated W2930 bulk cable.
  • Identification and finishing: Custom labeling and finishing options are available. Ask about channel color coding for your build.
  • Warranty: Lifetime warranty.

Choose the Configuration for Each Side

Identify the equipment connections at both ends, then select from the available preconfigured XLR and 1/4" TRS arrangements for each side. Check the complete two-channel arrangement on each side, including the required male or female XLR connectors where applicable, before ordering.

This listing is configured by side, not by individual channel. If you need a connector combination or channel-by-channel arrangement that is not covered by the presets, contact our custom cable specialists to confirm the appropriate build. The finished connector arrangement and cable length depend on your selections; do not assume a particular configuration from the product name alone.

Channel Mapping and Compatibility

Plan which source connects to which destination across both channels, and keep a record of the assignments for installation and troubleshooting. Use the snake for compatible analog audio connections, such as routing a pair of balanced mono line-level signals between suitable equipment. XLR options can also serve compatible microphone connections when configured appropriately. Confirm signal levels and input types; changing connector types does not convert microphone level to line level.

For balanced mono audio, each 1/4" TRS connection carries one balanced signal, not separate left and right stereo channels. A TRS socket may instead be wired for headphones or an insert, so confirm its function before ordering. Whether a connection remains balanced depends on the wiring and equipment at both ends. Confirm special pinouts or wiring requirements before the build.

This snake carries separate signal paths; it does not mix, split, or convert audio signals. Do not assume suitability for AES/EBU digital audio, network or control signals, or speaker-level power solely because the connectors fit. Check your equipment's requirements and choose a cable designed for the intended application.

Plan Your Cable Route and Breakout Reach

Measure the complete routing path, allowing room for bends, service slack, and access behind equipment. Consider the breakout reach needed at each end so both channels connect without pulling on the connectors. Check clearance around closely spaced or recessed jacks and confirm any special breakout-length requirements with our custom cable specialists before ordering.

Custom Labels and Channel Identification

Make the two-channel setup easier to patch and troubleshoot with labels identifying channel numbers, connected equipment, or destinations. Ask about channel color-coding options and provide your preferred label text and channel assignments when discussing the configuration.

Installation and Handling

Support the main cable and breakouts so equipment sockets do not carry the cable's weight. Leave enough access for connection and removal, avoid tight bends or pinching, and disconnect by the connector body rather than pulling on the cable. Check each channel's routing and operation before putting the system into service.

Customization Help

If the website's preconfigured options do not cover your needs, call or email Performance Audio's custom cable specialists. Provide your equipment models, XLR or TRS arrangement required on each side, XLR genders where applicable, cable length, breakout reach, and any special mapping, labeling, finishing, or wiring requests so we can confirm the build details. Confirm pricing and the build timeline before ordering if you have a deadline.

Details
  • Manufacturer:  Custom Cables
  • MPN: CUSTOM 2CH SNAKE EASY
  • Model Number: Custom Mogami W2930 2 Channel Snake Easy

You may also like

Recently viewed