Crown DCi 4|600DA DriveCore Install DA Series 4-Channel Power Amplifier with Dante (600W)

DriveCore Install DA Series Four-Channel, 600W @ 4Ω Power Amplifier with Dante / AES67 Networked Audio, and 70V/100V

DriveCore Install DA Series

For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp's advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.

Features:

• Integrated Dante / AES67 Networked Audio - Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
• Network Configuration, Monitoring & Control - Better monitoring, control and audio manipulation with the HiQnet protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
• Programmable General Purpose Input/Output Port - GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
• Digital Signal Processing - DSP capabilities include the following:
• LevelMAX Limiters
• Input/Output EQ
• Crossover
• Delay
• Matrix Router
• Speaker Line Monitoring
• More Details
• Redundant, independent Dante / AES67 ports
• Primary & Secondary
• Will accept 48khz or 96khz
• Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)
  Audio Architect Control and Monitoring
  DriveCore Amplifier Technology
  Universal PFC Power Supply
  DSP
• 48kHz processing
• 20 Presets
• Input router
  High, medium, and low priority inputs
• Input delay up to 2s
• Input EQ
• Crossover
• Output EQ
• Output Delay up to 100ms
• LevelMAX limiter
• Load Monitoring
  Pilot tone
• Normal
• Burst
  Continuous Load Monitoring
  Sweep Load Monitoring
• Channel Auto-Standby
• Speaker Tunings
  Aux-Port
• Sleep contact closure
• Amp Status output
  Removable air filters
  Front panel LED indicators
  AES67 Compatible

Specifications:

• Output Channels: 4
• Frequency Response (8Ω, 20Hz - 20kHz): ±0.25dB
• Total Harmonic Distortion (at full rated power, 20Hz - 20kHz): 0.35%
• Damping Factor (20Hz to 100Hz): >1000
• Load Impedance (Stereo/Dual Mode): 2Ω - 16Ω; 70Vrms and 100Vrms
• Load Impedance Bridge Mono: 4Ω - 16Ω; 140Vrms and 200Vrms
• Cooling: Continuously variable speed forced air, front to back airflow
• Maximum Fan Noise (re dBA SPL @ 1M): 45
• Required AC Mains (±10%): 100V-240V ~ 50/60Hz
• Power Connector: 15A IEC
• Dimensions (W x H x D):
  483 mm x 89 mm x 362 mm
  19 in x 3.5 in x 14.25 in
• Weight: 9.12 kg (20.1 lbs)

Includes:

• Crown DCi 4|600DA DriveCore Install DA Series 4-Channel Power Amplifier with Dante (600W)
• IEC Power Cord
• Limited 3-Year Warranty