Key Features
- 300W per Channel
- Integrated Dante / AES67 Network Audio
- Network Configuration, Monitor & Control
- Continuous Load Monitoring
- Onboard Digital Signal Processing (DSP)
- Limiters, Compressor, Delay, EQ, XOver
- Programmable General Purpose I/O Port
- 70V/100V Compatible
- Bridgeable Channel Pairs
- Front Panel Indicators
Description
DriveCore Install DA Series Four-Channel, 300W @ 4Ω Power Amplifier with Dante / AES67 Networked Audio, and 70V/100V
DriveCore Install DA Series
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp's advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.
Features:
- Integrated Dante / AES67 Networked Audio - Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
- Network Configuration, Monitoring & Control - Better monitoring, control and audio manipulation with the HiQnet protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
- Programmable General Purpose Input/Output Port - GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
-
Digital Signal Processing - DSP capabilities include the following:
LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Router
Speaker Line Monitoring - More Details
- Redundant, independent Dante / AES67 ports
- Primary & Secondary
- Will accept 48khz or 96khz
- Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)
Audio Architect Control and Monitoring
DriveCore Amplifier Technology
Universal PFC Power Supply
DSP - 48kHz processing
- 20 Presets
- Input router
High, medium, and low priority inputs - Input delay up to 2s
- Input EQ
- Crossover
- Output EQ
- Output Delay up to 100ms
- LevelMAX limiter
- Load Monitoring
Pilot tone - Normal
- Burst
Continuous Load Monitoring
Sweep Load Monitoring - Channel Auto-Standby
- Speaker Tunings
Aux-Port - Sleep contact closure
- Amp Status output
Removable air filters
Front panel LED indicators
AES67 Compatible
Specifications:
- Output Channels: 4
- Frequency Response (8Ω, 20Hz - 20kHz): ±0.25dB
- Total Harmonic Distortion (at full rated power, 20Hz - 20kHz): 0.35%
- Damping Factor (20Hz to 100Hz): >1000
- Load Impedance (Stereo/Dual Mode): 2Ω - 16Ω; 70Vrms and 100Vrms
- Load Impedance Bridge Mono: 4Ω - 16Ω; 140Vrms and 200Vrms
- Cooling: Continuously variable speed forced air, front to back airflow
- Maximum Fan Noise (re dBA SPL @ 1M): 45
- Required AC Mains (±10%): 100V-240V ~ 50/60Hz
- Power Connector: 15A IEC
- Dimensions (W x H x D):
483 mm x 89 mm x 362 mm
19 in x 3.5 in x 14.25 in - Weight: 9.12 kg (20.1 lbs)
Includes:
- Crown DCi 4|300DA DriveCore Install DA Series 4-Channel Power Amplifier with Dante (300W)
- IEC Power Cord
- Limited 3-Year Warranty