Skip to content

FREE USA Shipping $49+!

Canare DA202 110 Ohm AES/EBU Digital Audio Cable (Blue, By the Foot)

Canare SKU: CAN DA202
MPN: DA202

Price:
Sale price$0.75
Stock:
1548 In Stock & Ready to Ship

Key Features

  • Sold by the Foot
  • Shipped in a Continuous Length
  • 110 Ohm Impedance
  • For Digital Audio Applications
  • 25 AWG Conductors

Description

Blue Canare DA202 110-ohm AES/EBU digital audio cable

Blue Canare DA202 is a compact, two-conductor, shielded 25-AWG cable for 110-ohm AES/EBU digital audio connections. Sold by the foot, it lets you order the length needed for custom cable assemblies and digital audio patchbay wiring.

A smaller version of Canare DA206, DA202 uses a polyethylene rod configuration designed to maintain consistent 110-ohm impedance as the cable bends during installation. A braided shield with greater than 95% coverage and an integral drain wire make shield and ground termination practical for rack and patchbay work.

How to order

Sold by the foot. The quantity you enter is the total length in feet, not the number of separate pieces. For example, quantity 25 means one continuous 25-foot piece, not twenty-five 1-foot pieces. Enter quantity 100 for one continuous 100-foot piece. This listing is specifically the Blue jacket option.

Plan your installation

Check your connector's cable-entry and strain-relief compatibility against the nominal 0.197-inch (5.0 mm) outside diameter. For IDC punch-down blocks and 110-ohm digital audio patchbays, confirm that the terminals support this cable's 25-AWG stranded conductors.

The existing cable specification lists a maximum recommended AES/EBU run of approximately 590 feet (180 meters). Treat this as a planning guideline, not a guaranteed distance for every system; confirm the requirements of your connected equipment and complete signal path.

Features

  • Nominal 110-ohm impedance for AES/EBU digital audio wiring.
  • Compact construction with two 25-AWG conductors.
  • Polyethylene rod configuration helps maintain impedance through installation bends.
  • Braided shield with greater than 95% coverage.
  • Integral drain wire for shield and ground termination.
  • Blue PVC outer jacket.
  • Sold by the foot in a continuous length.

Specifications

  • Model: Canare DA202
  • Nominal impedance: 110 ohms
  • Conductor count: 2
  • Conductor size: 25 AWG
  • Conductor stranding: 7 strands, each 7.09 mil in diameter
  • Conductor cross-sectional area: 0.18 mm²
  • Conductor insulation colors: Orange and White
  • Insulation designation: IPE
  • Insulation thickness: 16.9 mil
  • Shield: Braid with greater than 95% coverage
  • Drain wire: Included
  • Jacket material: PVC
  • Jacket color: Blue
  • Nominal outside diameter: 0.197 in. (5.0 mm)
  • Nominal jacket thickness: 0.034 in. (0.8 mm), as listed in the existing specification
  • Jacket brittle point: -56°F (-49°C)
  • Conductor DC resistance: Less than 32.3 Ω/1,000 ft (less than 10.6 Ω/100 m)
  • Shield DC resistance: Less than 6.8 Ω/1,000 ft (less than 2.2 Ω/100 m)
  • Nominal capacitance: 45 pF/m
  • Nominal attenuation at 3 MHz: 5.0 dB/100 m
Details
  • Manufacturer:  Canare
  • MPN: DA202
  • Model Number: DA202

You may also like

Recently viewed