Audix DN43 Dante AES67 Integrated Microphone System Interface

The Audix DN43 connects an Audix M3 tri-element microphone and one additional Audix RJ45-equipped, single-element microphone to a Dante or AES67 audio network. Designed for installed audio systems, it combines four channels of 24-bit, 48 kHz audio with independent gain and filter controls, giving integrators a practical way to bring compatible analog microphones into a networked setup.

Simplified Microphone Connections

Shielded CAT cabling with RJ45 connections carries audio and supported microphone functions, including on-off contact closure and LED status indication, between each microphone and the interface. One input is dedicated to the M3 tri-element microphone, while the second accepts a compatible Audix single-element microphone, simplifying wiring for multi-microphone installations.

Independent Control for Each Channel

Each audio channel offers eight selectable preamp gain levels, plus low-pass and high-pass filters, with settings configurable through software. Balanced inputs with RFI filtering and 48V phantom power support the microphone signal path. Flash memory retains settings in the event of a power loss, helping preserve your system configuration.

Key Features

• One RJ45 input for the Audix M3 tri-element microphone and one for an Audix RJ45-equipped, single-element microphone
• Four Dante/AES67 audio channels with 24-bit, 48 kHz conversion
• Independent channel control with eight selectable preamp gain levels
• Software-configurable low-pass and high-pass filters on each audio channel
• Balanced, RFI-filtered audio inputs and 48V phantom power output
• Two 5V logic outputs per port, with source/sink capability for LED control by network-connected DSPs
• Flash memory retains settings during power loss
• Dante Domain Manager ready, with dynamic or static IP addressing
• Evaluated to UL2043 requirements and suitable for above-ceiling applications
• Designed, assembled, and tested by Audix in the USA