Sennheiser HMD 26-II-600-X3K1 Professional Broadcast Headset (600 Ohms, XLR & TRS Cable)

Professional Broadcast Boom Headset, 600 Ohm, Hypercardioid Microphone, 6 ft. Cable with XLR and 1/4" Connectors

The closed and supra-aural headsets HMD26 are lightweight and designed for use in broadcast applications at TV and Radio. The headphones are dimensioned for high maximum SPL. HMD26 provides high wearing comfort in combination with a good noise attenuation. All variants of HMD26 for Broadcast are equipped with ActiveGard which protects the user from volume peaks.

The dynamic microphone with hyper-cardioid characteristic satisfies with perfect broadcast sound up to 16 kHz. It is mainly designed for applications in noisy environments. Another important feature is the less sensitivity against structure-born sound. The gooseneck microphone can be used either on left or right-hand side. The microphone boom allows an individual adjustment at the right position.

600 Ohm per system, dynamic microphone, steel cable with connector XLR-3 and 1/4 inch jack, 3 foot length.

Features:

• Lightweight
• Extremely comfortable to wear, even for extended listening, due to the two-piece automatic headband and soft ear pads
• Single-sided cable routing
• Headphones for high maximum SPL
• ActiveGard (switchable) - safeguards you from volume peaks above 105 dB
• "Flip-away" headphone allows single-sided listening
• Dynamic mikrophone (hyper-cardioid pattern)
• Flexible microphone boom, can be worn on either left or right-hand side
• Muting of microphone once mic position is upright
• cable, microphone boom and ear pads can be changed easily due to modular concept
• Warranty 2 years

Specifications:

• Transducer principle (headphones): dynamic, closed
• Ear coupling: supra-aural
• Frequency response: 20 Hz - 18,000 Hz
• Impedance: HMD26-100: 50Ω mono / 100Ω stereo
• Impedance: HMD26-600: 300Ω mono / 600Ω stereo
• Impedance: HMD26-600S-7: 600 mono
• Characteristic SPL (1 kHz, 1 mW): 105 dB
• Characteristic SPL: HMD26-100: 115 dB at 1 kHz, 1V
• Characteristic SPL: HMD26-600: 107 dB at 1 kHz, 1V
• Max. sound pressure level (active): 127 dB SPL at 1 kHz, 200 mW (ActiveGard switched-off)
• Total harmonic distortion (THD): < 0.5%
• Contact pressure: approx 3.6 N
• Transducer principle (microphone): dynamic microphone (hyper-cardioid)
• Frequency response: 40 Hz - 16,000 Hz
• Nominal impedance: 300Ω
• Output voltage: 0.4 mV/Pa at 1 kHz
• Operating temperature: -15 C... +55 C
• Storage temperature: -55 C... +70 C
• Weight w/o cable: HMD26-600-XQ: 7.1 oz (200 g)
• Weight w/o cable: HMD26-600S-7: 4.6 oz (130 g)

Includes:

• 1 broadcast headset
• 1 cable clip
• 1 large headband padding
• 1 wind and pop screen
• 1 manual