Key Features
- 10" Composite Low Frequency Driver
- 110 dB Continuous Maximum SPL
- 250 Watts of Class AB Amplification
- Variable 50 to 130 Hz Low Pass Filter
- 1/4" TRS Bypass Footswitch Jack
- Continuously Variable Input Gain
- Phase Switch
- Pass-Through For Additional Connections
- Reinforced MDF Cabinet with Bracing
- 20 to 200 Hz Frequency Response
Description
10" Active Subwoofer with Built In Crossover
The Temblor T10 Active 10" Studio Subwoofer is designed for low frequency sound reinforcement while monitoring in a recording studio. The subwoofer utilizes a 10-inch composite low frequency driver with a frequency response of 20 to 200 Hz and a maximum SPL of 110 dB. The driver is housed within a heavily braced and reinforced MDF cabinet with a vinyl finish and ported bass reflex design. It is powered by a 250 Watt Class AB plate amplifier. To reduce vibration, the unit features internal dampening and rests on built-in feet. The subwoofer features a variable crossover frequency between 50 and 130 Hz, input gain controls from -30 dB to +6 dB, a 0° or 180° phase switch, and a ground lift switch.
You can connect to the subwoofer via a pair of balanced XLR inputs, a balanced pair of 1/4" TRS inputs, or an unbalanced pair of RCA inputs. The subwoofer also includes a balanced pair of XLR pass-through outputs, a balanced pair of 1/4" TRS pass-through outputs, and a balanced XLR sub output. The unit features a 120/240 VAC switchable power supply to accompany studio monitors in different regions.
Specifications:
- Transducer: 10" Composite
- Power: 250 W
- Amplifier Type: Class AB
- Maximum SPL: 110 dB continuous
- Controls:
Input gain: continuously variable from -30 to +6 dB
Low pass filter: continuously variable from 50 to 130 Hz
Phase switch: 0° and 180°
Ground lift switch - Inputs:
Left and right balanced XLR
Left and right balanced 1/4" TRS
Left and right unbalanced RCA - Outputs:
Left and right balanced XLR pass-through
Left and right balanced 1/4" TRS pass-through
Balanced XLR Sub out
1/4" Sub bypass - Design: Front firing bass-reflex acoustic port
- Internal dampening and heat sink
- Construction: Resonance-suppressing internal bracing
- Internal dampening and heat sink
- Frequency Response: 20 to 200 Hz
- Crossover Frequency: Variable 50 to 130 Hz
- Voltage:
100 to 120 VAC at 50/60 Hz
220 to 240 VAC at 50-60 Hz - Dimensions (H x W x D): 16.14 x 13.19 x 16" (410 x 335 x 406 mm)
- Weight: 31.7 lb (14.4 kg)