Middle Atlantic WRK-24SA-27LRD Stand-Alone Rack without Rear Door 24U

24 Space (42"), 27" Deep Stand Alone Rack without Rear Door, Black Finish

A rack series with a wider footprint, the WRK-SA series is designed for mounting equipment with thicker cable bundles than would fit easily in a basic rack, or to increase cooling airflow. Stand-alone installations version features fixed solid sides and seismic certification.

The Middle Atlantic WRK-24SA-27LRD 19" Stand-Alone Enclosure is ideal for concealing large cable bundles and provides good convection for safety.

Features:

• Fully welded construction for strength
• Fixed solid sides for security and to control airflow
• 24-1/4" overall width provides space for side cabling or cooling airflow
• Convenient lacing points and slotted rail brackets for cable management
• Standard front and rear adjustable 10-32 threaded rackrail with numbered spaces
• Extra-wide rackrail features cable pass-throughs to facilitate front-to-rear cabling
• Numbered rackspace increments speed equipment mounting
• Fully welded construction provides: static load capacity up to 10,000 lb (4,535.92 kg), UL listed load capacity up to 2,500 lb (1,134 kg), and seismic certified load capacity up to 900 lb (408.23 kg)
• Generous 24.25" (61.6 cm) OD width provides room for cables
• 0.5" (1.27 cm), 0.75" (1.9 cm), 1" (2.54 cm), and 1.5" (3.81 cm) electrical knockouts found on removable split rear plates, top knockout plate includes UHF/VHF antenna knockouts
• Available depth: 27.5" (69.85 cm)
• Cable pass-through located in the face of the standard front
• Rear adjustable 11-gauge, 10-32 threaded, extra-wide rack rail facilitates the passing of cable from the face of the equipment to the rear
• Laser-cut 1/8" (0.32 cm) thick internal steel braces for strength
• 14-gauge steel tops & bottoms, 16-gauge seamless steel sides
• Configurable open top accepts a number of top options
• Standard locking rear door incorporates spring loaded latch to keep door closed without key
• Stud in base of enclosure facilitates proper grounding and bonding of electronic equipment, as per NEBS and NEC standards
• Finished in a durable black textured powder coat
• Sports a powder coat finish
• Also available without rear door
• UL Listed in the US and Canada
• Seismic certified to the following codes and standards: 2007/2010 CBC, 2006, 2009/2012 IBC, ASCE 7-05 (2005 edition)/ASCE 7-10 (2010 edition), and 2006/2009 editions of NFPA 5000 for use in areas of high seismicity (zone 4 or Seismic Design Category (SDC) "D")
• Designed for mission critical and/or high-importance installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC
• Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities
• Importance factor (IP): 1.5
• Seismic Certified load capacity of 900 lb (408.23 kg) when used with WRK-Z4 seismic floor anchor brackets

Specifications:

• General Info
• finish: Black Powder Coat
• UL Standards Tested: UL1678
• Listing Agencies/Third Party Information
• ASC E: 7-10
• RoHS: Yes
• Greenguard: Yes
• UL Listing No: E173107
• Seismic Rating: Yes
• Dimensions
• Usable Depth: 25.75
• Usable Height: 42
• Capacity Weight U S: 10000
• Depth U S: 27.625
• Height U S: 48.125
• Width U S: 24.25
• Primary Package Weight U S: 155.6
• Rack Units: 24
• Technical Information
• Rackrail Type: 10-32
• Seismic Load Capacity: 900
• U L Load Capacity: 2500
• Material: Steel
• Mounting: Horizontal