Description
44 Space Narrow Gangable Rack, 27-Inches Deep, Rails, Rear Door, Black
Gangable equipment rack for multi-bay applications features the standard broadcast width of 22". EIA/TIA compliant and UL Listed (UL2416) with a load capacity to 3150 lbs., the LGNR Series rack includes a solid rear door with key lock, combination knockouts, top mounting rails tapped 10-32, front/rear rails tapped 10-32, and grounding stud in base. Optional side panels and front door. Made in the U.S.A. with certified U.S. steel.
Features:
- Welded Frame: 16-gauge steel seamless side-frame construction, 14-gauge steel top and base, reinforced at loadbearing junctions for strength equivalent to 11-gauge steel.
- Open Front: Rack ships ready to accept optional surface-mount door.
- Rear Door: Includes solid steel recessed rear door with key lock- mounts left or right.
- Knockouts: Rear frame has removable knockout panels and combination knockouts for conduit wiring above and below door (1/2", 3/4", 1", 1-1/2"), plus BNC knockouts for UHF/VHF antenna.
- Mounting Rails: Two pairs of 11-gauge steel adjustable rails with mounting holes tapped 10-32 and rack unit increments printed on EIA spacing. Rail clearance from front rails to outside frame (flush) is 1.75 in. [45mm]; front rails to inside of (optional) surface-mount door is 2.5 in. [64mm].
- Top Mounting Rails & Panels: 10U opening features rails with mounting holes on EIA spacing. Two 19"W steel panels included as shipping stiffeners can be used to close the top.
- Bottom: Includes grounding stud and provisions to add leg levelers (optional) or anchor bolts (not included).
- UL Listed (UL2416): Loads up to 3150 lbs. [1429 kg]
- EIA/TIA: Compliant.
- Hardware: Panel mounting hardware included.
- Finish: Black wrinkle powder epoxy.
- Origin: Made in the U.S.A. with 100% Certified U.S. steel