Key Features
- 8" Driver
- 70 Volt Transformer
- Taps at 1, 2, 4 & 8W
- For Paging & Background Music
- 10 oz. Magnet
- 1 Inch Voice Coil
Description
15-Watt 8" Dual Cone Driver with 10oz. Magnet and 8W, 70V Transformer
Lowell speaker Model 810 is a step up in full range performance from the commercial industry standard 8-in. (5 oz.) speaker. It features a 10 oz. magnet for higher power handling and greater sensitivity and includes a 1-in. copper voice coil, dual cone design, and plated steel basket. It provides solid performance and good value in almost any basic paging or background music system. The speaker is available with a selection of factory-wired transformers and will fit standard 8-in. ceiling grilles and backboxes. The dual cone speaker assembly employs a highly efficient magnetic structure energized by a 10 oz. ceramic magnet. The use of a 3/4 in. hard fiber whizzer cone mechanically coupled to the 1-in. voice coil provides extended high frequency response with fine clarity, while the molded fibre cone enhances mid- and low-range frequency performance.
Features:
- 15W 8" (10 oz.) speaker
- Dual cone speaker provides clear and accurate reproduction of music and voice communications.
- Frame is stamped 20-gauge steel with zinc-plated finish to prevent corrosion.
- Compatible with Lowell architectural grilles, backboxes, and sur- face baffles
- Manufactured in USA to meet or exceed all applicable EIA stan- dards.
- Optional factory-wired transformer:
- - TLM-572: taps at 0.25, 0.5, 1, 2, 5W (70/25V) - TLM-470: taps at 0.5, 1, 2, 4W (70V)
- - TLM-870: taps at 1, 2, 4, 8W (70V)
Specifications:
- Driver: 8 in. 15W dual cone with 10 oz. ceramic magnet, hard fiber whizzer cone and 1 in. voice coil.
- Frame: 20-gauge steel with zinc-plated finish.
- Power Rating: 15W
- Mounting Bolt Circle: 7.625 in. diameter
- Transformer: 70V with taps at 1, 2, 4, 8W
- Assembly Frequency Response: 50Hz-11.6kHz (±6dB) and 50Hz- 20kHz (±6.4dB)
- Assembly Mounting Depth: 3.0 in.
- Assembly Dispersion Angle: 95 degrees conical
- Assembly Average Sensitivity: 97.9 dB
- COMPLIANCE & CERTIFICATION
- Made in U.S.A. with global components
- Meets or exceeds industry standards