JBL Control 28-1L Indoor/Outdoor Speaker (Black)

$236.00
PA SKU # JBL CONTROL281L MFR # C28-1L UPC # 691991005138
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Only 3 Left! — In Stock & Ready to Ship Order now! Limited quantity in stock! Most orders placed before 3pm MST ship same day (except weekends and holidays).
  • Product Highlights
  • 120W Power Handling
  • 100º x 100º Coverage
  • 8" Woofer, 1" Tweeter
  • 45Hz-20kHz Frequency Response
  • Weather Resistant Enclosure
  • Contemporary High-Design Look
Color: Black Black White

High-Output 8-Ohm Indoor/Outdoor Background/Foreground Speaker, Black (Each)

The Control 28-1L is a two-way 8" speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors, This makes Control 28-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
  • 8" woofer with woven fiberglass cone
  • 1" PEI diaphragm tweeter with fluid cooling
  • Contemporary, high-design appearance
  • Built-in InvisiBall mounting hardware, plus available U-bracket
  • Weather resistant enclosure and transducers
  • Wide 100° x 100° coverage
  • 120 Watt power handling (240 Watt program)
  • High fidelity sound character with broad frequency response of 45 Hz - 20 kHz.
  • Frequency Range (-10 dB): 45 Hz to 20 kHz
  • Frequency Response (+/-3 dB): 62Hz - 16 kHz
  • Power Rating2: 240 W Continuous Program (2 hrs)
  • Maximum Input Voltage: 27.5 V RMS (2 hrs), 55.0 V peak
  • Maximum SPL3: 112 dB ave. Continuous Pink Noise (118 dB peak)
  • Sensitivity4: 91 dB, 1W/1m (ave. 100 Hz - 10 kHz)
  • Coverage Angle5: 100° x 100°
  • Directivity Factor (Q): 7.3 (averaged 1kHz - 16kHz)
  • Nominal Impedance: 8 ohms
  • Crossover Type: 2nd order low-pass, 1st order high-pass, plus conjugate shaping
  • Recommended Protective High-Pass6: 45 Hz high-pass (24 dB/oct)
  • Low Frequency Driver: 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
  • High Frequency Driver: 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton voice coil former.
  • Enclosure Material: High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
  • Grille: Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax multi-layer foam and tight-weave mesh vapor barrier backing.
  • Installation: InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
  • Environmental: IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax grille for breaking up driving rain and for especially difficult environments.
  • Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
  • Agency Rating: ROHS-compliant
  • Colors: Black (RAL9004) or white (-WH, RAL9016)
  • Dimensions (H x W x D)7: 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket.
  • Net Weight: 6.2 kg (13.5 lbs)
  • Shipping Weight: 13.4 kg (29.5 lbs) pair-packed (for 2 speakers)
  • Included Accessories: InvisiBall wall-mounting system, 6 mm x 180 mm hex key
  • Optional Accessories: MTC-28UB-1 - Yolk-type U-bracket (&-WH)
Write Your Own Review
You're reviewing:JBL Control 28-1L Indoor/Outdoor Speaker (Black)
Your Rating
Performance Audio, LLC BBB Business Review
Copyright © 2019. All rights reserved. Follow us on Facebook Follow us on Twitter Follow us on Instagram Follow us on YouTube Follow us on Pinterest