JBL Control 19CST In-Ceiling Subwoofer with Transformer

8 Inch In-Ceiling Subwoofer with Mounting Hardware - 70.7V/100V (Each)

The Control 19CS uses advanced proprietary technologies to produce powerful bass from a low profile in-ceiling design. The Control 19CS is perfectly suited to augment the low frequency output of any of the Control Contractor loudspeakers. High power handling and low distortion make the Control 19CS an ideal addition for sound systems requiring a higher fidelity sound from ceiling loudspeakers.

The unique Nested Chamber design delivers high output from a compact enclosure, while the acoustic lowpass character of this design means it is easy to augment a full-range sound system without an external crossover or separate amp channel. The Linear Dynamics port design originally developed for JBL's concert speaker systems, produces extended deep bass output.

The Control 19CS is protected from overload damage by JBL's exclusive SonicGuard circuitry, a protection system that is inaudible to the listener, ensuring reliability while providing full-fidelity sound. The premium performance capability ensures excellent sound character, providing pleasant, enveloping sound throughout the listening area.

The 200 mm (8 in) transducer features a pure butyl rubber surround for extended life and long excursion capability. The pole piece is vented for low distortion.

The Control 19CS can be connected into a system in a number of configurations: In parallel with full-range speakers resulting in a bass-overlap configuration (which is often acceptable); with an electronic crossover and separate amplifier channel, or; In conjunction with an active or passive high-pass filter on the full-range speakers, thus taking advantage of the Control 19CS's natural acoustic lowpass character.

Features:

• Unique Nested Chamber design and Linear Dynamic Aperture port design delivers high output from a compact enclosure
• JBL's exclusive SonicGuard overload protection allows higher operational levels and improved system reliability (19CS only)
• Component: Long excursion 200 mm (8 in) driver
• Packaged with grille, backcan and tile rails for fast installation and easy stocking
• Simple installation and wire connection method

Specifications:

• System:
• Freq. Range (-10 dB): 42 Hz - 200 Hz
• Power Capacity: 200 Watts Continuous Program Power, 100 Watts Continuous Pink Noise
• Nominal Sensitivity: 95 dB SPL, 1W @ 1 m (3.3 ft) in ceiling near corner ( /2), 89 dB SPL, 1W @ 1 m (3.3 ft) in center of ceiling (2 )
• Nominal Coverage Angle: 180 conical coverage
• Rated Maximum SPL: 115 dB @ 1 m (3.3 ft) in ceiling near corner ( /2)
• Nominal Impedance (19CS): 8 ohms
• Transformer Taps (19CST):070V: 60W, 30W, 15W & 7.5W taps100V: 60W, 30W, & 15W taps
• Transducer:
• Low-Frequency:200 mm (8.0 in) Polypropelene cone.38 mm (1.5 in) coil on aluminum former
• Physical:
• Enclosure: Backcan: Formed steel
• Baffle/Rim: Medium impact polystyrene, fire rated UL94V-0
• Overload Protection: Full-range power limiting to protect network and transducers. (On Control 19CS, not on Control 19CST)
• Termination: Removable locking connector with screw-down terminals. 2 input terminals and 2 loop-thru output terminals. Max. wire size 12 AWG (2.5 mm2)
• Safety Agency Rating: In accordance with IEC60849 / EN60849. Suitable for use in air handling spaces, per U.L.-2043, U.L.-1480, NFPA90, NFPA70A.
• Outside Dimensions (H x Dia): 345 x 345 mm (13.6 x 13.6 in), 318 mm (12.5 in) front of ceiling tile to back of backcan
• Cutout Size: 305 mm (12.0 in)
• Net Weight (ea): Control 19CS: T5.5 kg (12 lb), Control 19CST: 6.3 kg (14 lb)
• Shipping Weight (pair): Control 19CS: T12.7 kg (28 lb), Control 19CST: 14.3 kg (32 lb)
• Included Accessories:C-shaped support backing plate2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles)Cutout templatePaint shieldRemovable locking wiring connector