JBL Control 12C/T Compact Ceiling Loudspeaker (White)

Compact Ceiling Loudspeaker, White (Each)

Control 12C/T is a full-range ceiling speaker consisting of 76 mm (3 inch) wide-bandwidth cone driver mounted in a vented, paintable baffle made of UV resistant UL94-V0 material, with a pre- attached blind-mount backcan for quick and easy installation. The speaker is designed to provide excellent sound quality for a wide variety of low to medium volume applications such as music cafes, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, convention centers, hotels, educational facilities, and more.

The 130 coverage is especially wide, delivering consistent sound quality for listeners located both off and on axis.

The high technology cone driver is designed with a lightweight high temperature KaptonTM voice coil former and aluminum coupling ring to reduce distortion and extend the high frequency response of the system. The FEA-optimized motor construction and cone geometry allow for smooth frequency response and improved off-axis performance. A high temperature grade voice coil insures stable performance under long term high power working conditions. The butyl rubber surround provides long-term durability and good sonic damping, and the polypropylene cone is water and humidity resistant.

The removable locking connector has screw terminals for secure wire termination and "loop through" terminals. A dual strain relief assembly provides clamping for use with cable or flex conduit.

The compact backcan extends only 138 mm (5.4 inches) behind the baffle, allowing the speaker to fit into more shallow ceiling areas.

Ideal for a wide variety of projects, the Control 12C/T is switchable for use as either an 8 ohm low-impedance speaker or as part of a 70V or 100V distributed loudspeaker system with a 15 Watt multi-tap transformer. The speaker comes complete with two tile rail supports, one C-ring support backing plate, cutout template, paint shield and grille. A safety seismic attachment ring is provided on the top surface. Available in white (Control 12C/T) or black (Control 12C/T-BK).

Features:

• 76 mm (3 in) full-range driver
• Blind-mount backcan for quick and easy install
• Dual conduit/cable clamps
• Combined 70V/100V and low impedance direct operation
• 20 Watts at 8Ω nominal setting
• 15W multi-tap at 70V/100V
• 68 Hz - 17 kHz bandwidth with wide 130 coverage
• White (Control 12C/T) or black (Control 12C/T-BK)

Specifications:

• Frequency Range (-10 dB) : 68 Hz - 17 kHz
• Power Capacity (at low-Z) :
  40 Watts Continuous Program Power
  20 Watts Continuous Pink Noise
• Transformer Taps : 15 W, 7.5 W, 3.8 W @ 70V and 100V (& 1.9 W @ 70V only)
• Frequency Response (+/-3 dB) : 95 Hz - 15 kHz
• Nominal Sensitivity : 84 dB
• Nominal Coverage Angle : 130 conical coverage
• Directivity Factor (Q) : 9.8
• Directivity Index (DI) : 7.4 dB
• Rated Maximum SPL : 97 dB @ 1 m (3.3 ft) average, 103 dB peak
• Nominal Impedance : 8 ohms (in direct/bypass 8Ω setting)
• Full-Range Driver : 76 mm (3 inch) with polypropylene cone, butyl rubber surround, Kapton voice coil former, high temperature voice coil, aluminum coupling ring for low distortion and HF extension
• Input Connectors : Removable locking 4-pin connector with
• screw-down terminals. Max wire size 12 AWG (2.5 mm2)
• Connector Wiring : Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru
• Strain Reliefs : Strain relief for two cables or two flex conduits via coupled clamping mechanism
• Materials : ABS baffle with UL94-V0 and UL94-5VB flame class fire rating. Zinc-plated steel backcan
• Safety Agency : UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems
• Dimensions : 196 mm diameter x 138 mm depth from back of baffle (7.7 in diameter x 5.4 in depth)
• Ceiling Cutout Size : Circular cutout with 170 mm (6.7 in) diameter (cardboard cutout template included)
• Ceiling Thickness Range : Up to 35 mm (1.4 in) with stock dog-ears. MTC-TCD thickceiling dog-ears available for up to 55 mm (2.2 in) ceiling thicknesses.
• Safety Seismic Attachment : One point, top surface
• Net Weight : 1.6 kg (3.5 lbs, one speaker)
• Shipping Weight : 6.7 kg (14.7 lbs, pair in master carton)
• Included Accessories : C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille.
• Optional Accessories :
  MTC-24NC new construction bracket
  MTC-24MR mud-ring construction bracket
  MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 55 mm (2.2 in, ordering one set = 24 dog-ears for 8 speakers)
  MTC-48TR tile rail for 1200 mm (4 ft) tile spans