Description
44 Space (77") Gangable Rack, 27" Deep
The LGR gangable rack is UL Listed (Standard 1678) and rated to support up to 3150 lbs. Open frame is welded 16-gauge steel with seamless side-frame construction, a 14-gauge steel bottom, and reinforcements at loadbearing junctures for strength equivalent to 11-ga. steel. Each rack frame is beveled front and rear and includes a vented rear door, steel closure panels (for top), removeable knockout panels above/below rear door, panel mounting hardware, and two (2) pair of adjustable rack rails. Finish is black wrinkle powder epoxy.
Features:
- UL rated to support up to 3150 lbs.
- Made in the USA with 100% certified U.S. steel.
- Adjustable Rack Rails: (2-pair RRD-series) tapped 10-32 and imprinted with rack unit increments. Clearance from rails to flush outside of frame is 1.75" (2.5" from rail to inside of optional surface-mount front door).
- Front: open front has vents top and bottom for passive ventilation and will accept surface front door (LFD-series, order separately).
- Rear: rack includes recessed, locking rear door vented top/ bottom. Removable knockout panels set above and below rear door. Rack can also be purchased without a rear door.
- Top: open top features 6"D rear conduit plane with knockouts for conduit: three (2"-1"), two (1.5"-1"), plus room to use a Greenlee-style punch for 4" conduit. Top also features six (0.5") knockouts for BNC style wireless antennas. Two flush solid steel panels (3U and 7U) are included to close the 10U opening. 19"W fan panels may be used instead (order separately).
- Bottom: 14-gauge steel bottom with full-size opening accepts large cable bundles. Vertical array of 2" holes and 4" x 1.5" openings frontto-rear along rack bottom assist cabling between racks. Includes grounding stud, provisions for optional leg levelers (order separately) and holes for optional anchor bolts (by others). Will accept optional stationary or mobile platform base (order separately).