d:screet CORE 4061 Stereo Microphone Kit for Loud Sound Pressure Levels

This d:screet Stereo Microphone Kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage. It contains a complete stereo pair; two handpicked omnidirectional condenser microphones, selected on sensitivity within &pm;1.5 dB.

It combines two d:screet 4060 Miniature Omnidirectional Microphone, Normal SPL, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with our d:screet 4060, 4061, 4062 and 4063 Miniature Microphones to place on a reflective boundary such as a floor, wall, ceiling, piano lid etc. This enables the mics to capture the ambient sound of the area. The sound captured from this "pressure zone" has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air". This solution serves as a kind of acoustical zoom.

There are many accessories included in the kit. One of them is the DMM0007 Universal Surface Mount. This mount allows all kinds of instruments, from acoustic guitar through grand piano and drums, to be mounted in the best-sounding position. The mount uses special non-marking adhesive discs for attachment.

Features:

Extremely rugged and reliable
Exceptional audio quality
Low noise and high sensitivity
Large selection of accessories
Modular adapter system fits most professional wireless systems

Specifications:

Directional pattern: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, ±2 dB:
Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz.
High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz

Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa

Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))

Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)

Total harmonic distortion (THD) - Legacy: < 1% THD up to 123 dB SPL peak; < 1% THD up to 120 dB SPL RMS sine

Total harmonic distortion (THD) - CORE: < 1% THD up to 137 dB SPL peak

Dynamic range - Legacy: Typ. 97 dB

Dynamic range - CORE: Typ. 111 dB

Max. SPL, peak before clipping: 144 dB

Output impedance: 30 - 40 Ω

Cable drive capability: Up to 300 m (984 ft)

Power supply (for full performance): For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance

Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter

Connector: MicroDot

Color: Black, beige, brown or white

Weight: 7.5 g (0.26 oz) incl. Cable and MicroDot connector

Microphone diameter: 5.4 mm (0.21 in)

Microphone length: 12.7 mm (0.5 in)

Cable length: 1.8 m (5.9 ft)

Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin

Temperature range: -40°C to 45°C (-40°F to 113°F)

Relative humidity (RH): Up to 90%

Includes:

2 x 4061 Omnidirectional Mic, Lo-Sens, Black, 3 meter cable
2 x BLM6000-B Boundary Layer Mount, Black
2 x DAD6001-BC MicroDot to 3-pin XLR (P48) w. Belt Clip
1 x DMM0007 Universal Surface Mount, 5 pcs.
2 x DMM0011-B Magnet Mount, Black
1 x DUA0560 Windscreen, Black, 5 pcs.
2 x MHS6001 Microphone Holder for Strings

DPA d:screet Core 4061 Stereo Microphone Kit for Loud SPL

Key Features

Description

Features:

Specifications:

Includes:

{{ item.title }}