Description
Omnidirectional Solid State Microphone P48
The 4041-SP is designed to work in a standard 48 V phantom power environment. Since the capsule is the same as for the high voltage alternative 4041-S, the 4041-SP offers the same superior sound quality, with very slight changes in the specifications.
The cartridge MMC4041 can be unscrewed from the preamplifier which allows for the exchange of the preamplifier module. It is therefore always possible to upgrade to the high voltage preamplifier, also using the DPA mic amp HMA5000.
The frequency response has a 4-6 dB soft lift around 8 kHz and matches the response of the legendary 4040 Hybrid Microphone. This microphone offers a totally transparent audio path with an exceptionally low noise floor of maximum 8 dB(A) and a SPL handling capability of 134 dB SPL peak.
Features:
- the ultimate vocal mic
- handles high sound pressure levels with no distortion
- natural and transparent sound
Specifications:
- Directional characteristics: Omnidirectional
- Principle of operation: Pressure
- Cartridge type: 24 mm (1 in) condenser with stainless steel diaphragm
- Frequency range, +/- 2 dB: 20Hz - 20kHz with 4 - 6 dB soft boost at 8 kHz
- Sensitivity, nominal, +/-2 dB: 70 mV/Pa; -26dB re. 1 V/Pa
- Equivalent noise level A-weighted: Max. 8 dB(A) re. 20 Pa
- Equivalent noise level A-weighted: Max. 20 dB
- S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 86 dB(A)
- Total harmonic distortion (THD):
- Dynamic range: Typ. 118 dB
- Max. SPL, peak before clipping: 134 dB
- Output impedance:
- Cable drive capability: Up to 100 m (328 ft)
- Current consumption: 2.20 mA
- Connector: 3-pin XLR-M (Standard P48)
- Weight: 190 g (6.7 oz)
- Capsule diameter: 24 mm (1 in)
- Length: 170 mm (6.69 in)