Key Features
- 1000W @ 8 Ohms Stereo
- 5000W Max Output in Bridged Mono
- Front Panel Indicators for Output Level
- Forced Air Cooled (Front In, Rear Out)
- Front Mounted Attenuators
- Rack Ears for Installation in 2RU Rack
- Neutrik Speakon Output Connectors
- On/ Off Limiter Switch
- Extensive Protection Circuitry
- Gain Selectable Switch for Both Channels
Description
Two-Channel High Performance Power Amplifier, 1000 Watts per Channel at 8 Ohms
The KLR-5000 Two-Channel High Performance Amplifier from Ashly delivers a minimum power of 2500W per channel into 2 Ohm loads, 1700W RMS per channel into 4 Ohm loads, or 1000W RMS per channel into 8 Ohm loads with both channels operating. The KLR-5000 is optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 ohm loads and are housed in a uniform, rugged, 2RU chassis.
The output topography of the KLR-5000 is a two step class-H design. The protection circuits include output over current protection, DC output protection, chassis internal temperature monitoring, inrush limiting and a main circuit breaker.
The KLR-5000 incorporates the latest technologies delivering quality and value for professional performance at an extremely affordable price. Whether your application is professional audio or fixed performance installation, the KLR-5000 amplifier is optimized to provide reliable audio performance with sonic perfection.
Features:
- Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
- Switch mode power supply provides high efficiency and low weight
- Forced air cooled (front in, rear out)
- Removable dust filters
- Front mounted attenuators
- Front panel indicators for output level, clip/ protect, and power on/ off
- Gain selectable switch for both channels
- Rack ears for permanent installation in a standard 2RU enclosure
- Neutrik Speakon output connectors
- 3-position gain switch (1V, 32dB or 26dB sensitivity)
- 3-position mode switch (bridged, stereo or parallel mono)
- 3-position HPF switch (30Hz, 50Hz or off)
- On/off limiter switch
- Permanently attached power cord
- Extensive protection circuitry
Specifications:
- Power Rating:
8Ω, 20Hz-20kHz, 1% THD: 1000W
4Ω, 20Hz-20kHz, 1% THD: 1700W
2Ω, 20Hz-20kHz, 1% THD: 2500W
Bridged mono mode:
4Ω, 20Hz-20kHz, 1% THD: 5000W - Current Draw:
All channels driven @ 4Ω
Idle: 1.14A
1/8th power pink noise: 17.5A
1/3 power sine wave: 24.7A
S/N (20Hz-20kHz, unweighted): >110dB - Circuit: 2 step class H
- Online Thermal Dissipation:
All channels driven @ 4Ω
Idle (BTU/ hr): 215
1/8th power pink noise (BTU/ hr): 3111
1/3 power sine wave (BTU/ hr): 4395
Input gain switch: 1.4V, 26dB, 32dB - Frequency Response: 1W @ 8Ω 20Hz-20kHz (-3dB down point): +0.3dB 5Hz-70kHz
- Signal-to-Noise Ratio: S/N (20Hz-20kHz, unweighted)
- Damping Factor: 100Hz @ rated power @8Ω: >380
- Total Harmonic Distortion (THD): 20Hz-20kHz: 10dB below rated output @ 4Ω
- Impedance: 12 kΩ, balanced
- HPF: 30Hz, 50Hz, off (12dB/ Oct)
- Protection: Output over current, DC output, chassis temperature, mains breaker (KLR-5000 uses internal mains fuse)
- Cooling: Variable speed fan, front-to-rear air flow
- Front Panel: Protection/ clip, signal, power
- Attenuation: Per channel, front panel
- Input Connections: 3-pin Euroblock, XLR, ¼" TRS phone jack
- Output Connectors: Each channel four pin Speakon type
- Power Requirements: 3-prong NEMA 5-20
- Temperature: 14-104°F (-10-40°C)
- Humidity: 0-90%
- Compliance: cCSAus, FCC, CE, RoHS
- Dimensions: 19 x 3.5 x 16" (482 x 88 x 407mm)
- Weight: 28.2 lb. (12.8kg)