Ashly KLR-3200 Power Amplifier

PA SKU # ASH KLR3200 MFR # KLR-3200 UPC # 694970931978
  • Support Lifetime Tech Support!
  • Support 30 Day Returns!
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • 650W @ 8 Ohms Stereo
  • 3200W Max Output in Bridged Mono
  • Front Panel Indicators for Output Level
  • Forced Air Cooled (Front In, Rear Out)
  • Front Mounted Attenuators
  • Rack Ears for Installation in 2RU Rack
  • Neutrik Speakon Output Connectors
  • On/ Off Limiter Switch
  • Extensive Protection Circuitry
  • Gain Selectable Switch for Both Channels

Two-Channel High Performance Power Amplifier, 650 Watts per Channel at 8 Ohms

Ashly's KLR-Series amplifiers are high-efficiency, lightweight, two-channel, high power amplifiers incorporating the latest technologies delivering quality and value for professional quality performance at an extremely affordable price. Whether your application is professional audio or fixed performance installation, KLR amplifiers are optimized to provide reliable audio performance with sonic perfection.

Covering a power range from 1000 to 2000 watts per channel at 2 ohms (20Hz-20kHz, 1% THD), the KLR-2000, KLR-3200, and KLR-4000 are perfectly suited for a wide range of sound reinforcement. All three KLR amplifiers are optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 ohm loads and are housed in a a uniform, rugged 2RU chassis. Each KLR amplifier uses a state-of-the-art Switch Mode Power Supply which assures you of flawless lows, punchy mids and pristine highs. The output topography of the KLR-2000 and KLR-3200 are Class-AB, while the KLR-4000 is a two-step Class-H design. KLR-Series protection circuits include: output over-current protection, DC output protection, chassis internal temperature monitoring, inrush limiting and a mains circuit breaker.

Front panel features include: individual input attenuators, signal, clip and protect LEDs, air inflow vents with removable dust filters, power switch and power LED. Rear panel features include: balanced inputs via 3-pin Euroblock, combo XLR/ 1/4" TRS connectors, Neutrik Speakon output connectors, 3-position gain switch (1V, 32dB or 26dB sensitivity), 3-position mode switch (bridged, stereo or parallel mono), 3-position HPF switch (30Hz, 50Hz or off), on/off limiter switch, air outflow vents and permanently attached power cord.
  • Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
  • Switch mode power supply provides high efficiency and low weight
  • Forced air cooled (front in, rear out)
  • Removable dust filters
  • Front mounted attenuators
  • Front panel indicators for output level, clip/protect, and power on/off
  • Gain selectable switch for both channels
  • Rack ears for permanent installation in a standard 2RU enclosure
  • Neutrik Speakon output connectors
  • 3-position gain switch (1V, 32dB or 26dB sensitivity)
  • 3-position mode switch (bridged, stereo or parallel mono)
  • 3-position HPF switch (30Hz, 50Hz or off)
  • On/off limiter switch
  • Permanently attached power cord
  • Extensive protection circuitry
  • Power Rating:
    650W/Channel @ 8 Ohms Stereo
    1100W/Channel @ 4 Ohms Stereo
    1600W/Channel @ 2 Ohms Stereo
    3200W @ 4 Ohms Bridged Mono
  • Damping Factor: > 380
  • Input Impedance: 12 kOhms, Balanced
  • Gain: 33dB
  • Frequency Response: 20Hz - 20kHz
  • Signal-to-Noise Ratio: > 109dB
  • Total Harmonic Distortion (THD): < 0.05%
  • Connectors:
    2 x 3-Pin Euroblock Inputs
    2 x XLR/TRS Combo Inputs
    2 x Neutrik Speakon Outputs
  • Controls and Indicators:
    2 x Level Control Knobs
    2 x 3-Position Gain Switches
    1 x 3-Position Mode Switch
    1 x 3-Position HPF Switch
    1 x Limiter Switch
    1 x On/Off Switch
  • LEDs for Level, Clip/Protect, and Power
  • Cooling: Variable Speed Fan, Front-to-Rear Airflow, Removable Dust Filters
  • Power Consumption: 0.92A, Idle
  • Power: Permanently-Attached 3-Prong IEC Cable
  • Operating Temperature:
    14 to 104°F (-10 to +40°C)
    Humidity: 0 to 90%
  • Protection: Output Over-current, DC Output, Chassis Temperature, Mains Breaker
  • Dimensions (WxHxD): 19 x 3.5 x 16" (482 x 88 x 407mm)
  • Weight: 24 lbs (10.9kg)
Write Your Own Review
You're reviewing:Ashly KLR-3200 Power Amplifier
Your Rating
Performance Audio, LLC BBB Business Review
Verified by Comodo Secure

We Accept Visa Credit/Debit Cards
We Accept American Express Credit/Debit Cards
We Accept Mastercard Credit/Debit Cards
We Accept Discover Credit/Debit Cards
We Accept PayPal Payments and Financing
We Accept Bank/Wire Transfers
We Offer Financing
Copyright © 2019. All rights reserved. Follow us on Facebook Follow us on Twitter Follow us on Instagram Follow us on YouTube Follow us on Pinterest