Skip to content

FREE USA Shipping $49+!

Neutrik NC3FD-LX-B Female 3-Pin XLR Chassis Connector (Black/Gold)

Neutrik SKU: NTK NC3FDLXB
MPN: NC3FD-LX-B

Price:
Sale price$9.00
Stock:
275 In Stock & Ready to Ship

Key Features

  • Female 3-Pin XLR Connector
  • Solder Cups
  • Standard D-Shape Housing
  • Black Metal Housing
  • Gold Contacts

Description

Panel-mounted female XLR with a black housing and gold contacts

The Neutrik NC3FD-LX-B is a female 3-pin XLR chassis connector in the DLX series, with a black-chromium-plated metal housing and gold-plated contacts. Its D-style mounting flange and rear solder cups suit custom panels, stage boxes, and compatible equipment repairs where a fixed XLR connection is needed.

Sold individually. This is a solder-termination panel connector, not a cable-end connector or a prewired feedthrough. Black/Gold describes the housing/contact finish, not the finish of the entire connector.

Choose the finish and connector gender

Female versions mate with compatible male 3-pin XLR cable connectors. Male versions mate with compatible female 3-pin XLR cable connectors. Choose gender for the mating cable and circuit design; gender alone does not establish signal direction or wiring compatibility.

Female chassis connectors

Male chassis connectors

These links are for standard single connectors. Latchless versions and bulk boxes are separate products. Contact plating is a material choice, not a guarantee of improved sound.

Check panel fit before ordering

The D-style housing supports front or rear mounting. Check Neutrik's dimensional drawing against the panel cutout, mounting holes, panel thickness, rear soldering clearance, and available cable space before replacing an existing connector. A D-style flange does not guarantee every installation will fit without modification.

Soldering and grounding

Follow the equipment's schematic and the connector's numbered terminals. Confirm the mating-face versus solder-side view before wiring; do not rely on the apparent left-to-right position of the contacts. The listed maximum conductor size is 2.5 mm² / 14 AWG; it is a terminal limit, not a required wire gauge.

Use appropriate soldering technique and provide internal cable support so wiring does not pull on the solder joints. The female contacts incorporate a solder barrier to help keep solder out of the mating area, but correct heat and solder control are still necessary.

An optional connection permits pin 1 to be joined to chassis ground. Make that connection only as required by the equipment's grounding design; do not automatically bridge signal contacts or change an existing grounding scheme. Disconnect equipment power before installation, then check continuity and shorts before use.

Connection features

  • All-metal housing supports RF shielding when properly integrated into the equipment.
  • Duplex ground contact supports contact integrity between the chassis connector and mating cable connector.
  • Cage-type female contacts and solder barrier.
  • Large solder contacts for termination access.
  • Latch-lock design secures a compatible mating cable connector.
  • D-style chassis shape with front or rear mounting.

Electrical specifications

  • Model: NC3FD-LX-B
  • Type: Female 3-pin XLR chassis receptacle, DLX series
  • Capacitance between contacts: ≤4 pF
  • Contact resistance: ≤5 mΩ
  • Dielectric strength: 1.5 kV DC
  • Initial insulation resistance: Greater than 2 GΩ
  • Insulation resistance after damp-heat test: Greater than 1 GΩ
  • Rated current per contact: 16 A
  • Rated voltage: 50 V

Component ratings do not establish the safe operating limits of a finished assembly. Match the connector, wiring, circuit, and installation requirements.

Mechanical specifications

  • Insertion force: ≤20 N
  • Withdrawal force: ≤20 N
  • Lifetime: More than 1,000 mating cycles
  • Maximum wire size: 2.5 mm² / 14 AWG
  • Termination: Solder contacts
  • Locking device: Latch lock
  • Mounting direction: Front and rear
  • Chassis shape: D

Materials and finish

  • Contact plating: Gold hard alloy over nickel
  • Contacts: Bronze (CuSn6)
  • Insert: Polyamide PA 6.6, 30% glass reinforced
  • Locking element: Steel Ck67
  • Shell: Zinc diecast (ZnAl4Cu1)
  • Shell plating: Black chromium

Environmental specifications

  • Temperature range: −30°C to +80°C
  • Protection class: IP40
  • Flammability classification: UL 94 HB
  • Listed standard compliance: IEC 61076-2-103
  • Solderability: Complies with IEC 68-2-20

IP40 is not a waterproof rating. Provide enclosure protection appropriate to the installation.

Details
  • Manufacturer:  Neutrik
  • MPN: NC3FD-LX-B
  • Model Number: NC3FD-LX-B

You may also like

Recently viewed