Skip to content

FREE USA Shipping $49+!

Custom Cables HD-SDI Digital Coax Video Cable Made from Canare L-4CFB & Canare Connectors

Custom Cables SKU: CUS HDSDIL4CFB
MPN: CUSTOM HD/SDI L-4CFB

Price:
Sale price$15.00
Stock:
Custom Made to Order

Key Features

  • Canare L-4CFB 75 Ohm Coaxial Cable
  • Genuine Canare BNC & F-Type Connectors
  • Lifetime Warranty
  • Available in 4 Colors
  • Custom Labeling Available
  • Finishing Options
  • Custom Made to Order

Description

Custom HD-SDI Video Cable with Canare L-4CFB

Connect compatible digital video equipment with a finished coaxial cable built around your actual route. Performance Audio makes this assembly to order using Canare L-4CFB 75-ohm digital video coaxial cable and genuine Canare connectors, with length, color, labeling, and finishing options to suit your setup.

Built for Your Setup

  • Canare L-4CFB 75-ohm coaxial cable.
  • Genuine Canare BNC and F-type connector options.
  • Available in four colors.
  • Custom labeling and finishing options.
  • Finished cable assembly made to order, not bulk wire.
  • Lifetime warranty.

Match Connectors to the Application

Choose the required connector configuration from the available build options. BNC is commonly used on SDI video equipment; select compatible 75-ohm connections for the complete route. F-type connections should be chosen only where the equipment and application require them. Adapting the connector shape does not convert the signal format or make an F-type port an SDI port.

Check each port's function, connector type, and signal direction before ordering. Connect a compatible video output to a receiving input. This cable does not convert SDI to HDMI, change video resolution or frame rate, or provide active signal distribution.

Confirm SDI Format and Run Length

Plan the assembly for the exact SDI data rate and route length required by your equipment. Resolution alone is not enough to establish suitability; frame rate, transport format, cable attenuation, receiver capability, and intermediate connections also matter. Confirm the supported distance for L-4CFB at your intended rate with our specialists before choosing the length.

Do not assume that an HD-SDI listing guarantees operation at 3G-SDI, 6G-SDI, or 12G-SDI, or at every 4K format. Higher-rate or longer-distance links may require a different cable or an active transport solution. This assembly does not reclock or regenerate the signal.

Keep the Complete Path at the Required Impedance

Use compatible 75-ohm connectors, patch points, couplers, and terminations throughout the video route. A physically mating connector does not establish the correct impedance or bandwidth. Avoid substituting 50-ohm antenna connections or unspecified adapters. Additional joins and adapters can reduce the margin available for a reliable link.

Follow the equipment manufacturer's termination instructions. Do not add a terminator to a port that does not require one or use a passive Y connection as a substitute for a suitable SDI distribution amplifier.

Plan Length, Routing, and Clearance

Measure the actual route, allowing service slack and gentle bends without leaving unnecessary excess. Include patch panels, couplers, and other cable sections when assessing the complete link. Check clearance for BNC locking collars or F-type fittings, especially behind racks and closely spaced ports.

Support the cable so its weight does not pull on equipment sockets. Avoid sharp bends, crushing, tight cable ties, and repeated flexing at the connectors. Confirm the jacket and complete assembly are suitable for the intended environment rather than assuming outdoor, burial, plenum, or repeated reel-use suitability.

Colors, Labels, and Finishing

Choose from four available cable colors and discuss labeling or finishing options for your build. Labels can identify cameras, destinations, patch points, or signal assignments at both ends. Keep cable identification consistent with your system documentation to simplify setup and troubleshooting.

Handling and Testing

Handle connectors by their bodies, release BNC locking collars before removal, and follow the appropriate fastening method for F-type connectors. Protect contacts from contamination and damage, and coil the cable without sharp kinks.

Test the complete route with the intended source and receiver at the required format before a production or event. Check stable picture lock and any available signal-error indicators. A continuity check or a successful test at a lower data rate does not establish performance at the intended SDI rate. Recheck the link after adding adapters, patch points, or extra length.

Customization Help

Call or email Performance Audio's custom cable specialists with your equipment models, SDI format and data rate, required length, connector configuration, intermediate connections, color, and labeling or finishing requests. Confirm application suitability, build details, pricing, and the timeline before ordering if you have a deadline.

Details
  • Manufacturer:  Custom Cables
  • MPN: CUSTOM HD/SDI L-4CFB
  • Model Number: Custom Canare L-4CFB HD/SDI Cable

You may also like

Recently viewed