Custom Cables 4-Channel Audio Snake Made from Mogami W2931 & Pro Connectors (XLR to 1/4" TRS)

Custom Mogami W2931 4-Channel XLR-to-1/4" TRS Audio Snake

Keep four balanced analog audio connections together in one organized cable run. Custom built to order by Performance Audio using Mogami W2931 audio snake cable and professional connectors, this assembly helps tidy connections between compatible XLR and 1/4" TRS-equipped mixers, audio interfaces, processors, patchbays, and other audio equipment.

Built for Your Connections

• Cable: Mogami W2931 4-channel audio snake cable.
• Connection format: Four separate XLR-to-1/4" TRS paths for compatible balanced mono analog audio connections.
• Connector selection: Choose from the professional connector options available for this build. Confirm the XLR gender required by your equipment and check connector clearance at both ends.
• Custom build: Finished cable assembly made to order, not unterminated W2931 bulk cable.
• Identification and finishing: Custom labeling and finishing options available. Ask about channel color coding for your build.
• Warranty: Lifetime warranty.

Four Separate Balanced Audio Paths

Use each channel between a compatible balanced analog output and input. Each XLR-to-TRS connection carries one balanced mono signal, not a left/right stereo pair. A stereo line-level connection uses two snake channels, one for left and one for right; four channels can organize two stereo pairs or four independent mono connections.

The four paths remain separate. This snake does not mix, sum, split, or convert signals, and it does not provide microphone preamplification or isolation. Balanced operation requires compatible balanced equipment and wiring throughout the connection.

Match Connector Gender, Socket Function, and Signal Level

Check whether each XLR connection needs a male or female connector, then match the source output level to the destination input. An XLR socket may serve a microphone input or a line-level connection; changing the plug format does not convert between mic and line levels.

A 1/4" TRS socket can be used for balanced mono audio, stereo headphones, or an insert send/return connection. These functions are not interchangeable. This listing is intended for balanced mono audio paths, not headphone distribution or an insert breakout. Confirm equipment wiring before using unbalanced sockets or adapters.

Do not assume that an XLR-to-TRS connection provides a suitable phantom-power path for a microphone. Confirm the microphone's power requirements and the receiving equipment's input and phantom-power arrangements. Keep phantom power off when connecting line-level equipment unless its manufacturer explicitly permits that use, and mute or power down the relevant signal path before patching.

Connector fit alone does not establish suitability for AES/EBU digital audio, DMX, or other control formats. This is an analog audio signal snake, not a speaker cable; never use it between a power amplifier's speaker outputs and passive speakers.

Plan Your Length and Breakout Reach

Measure the complete routing path with room for bends, service slack, and access behind equipment. Check how far apart the four jacks are at both ends and allow enough breakout reach to connect them without strain, especially when patching across several devices.

Check clearance around recessed or closely spaced sockets, including access to XLR release latches. Confirm any special breakout lengths, connector orientation, channel mapping, or wiring requirements with our custom cable specialists before the build.

Custom Labels and Channel Identification

Label channels by number, left and right, connected equipment, or destination to make setup and troubleshooting easier. Ask about channel color-coding options and provide your preferred label text and channel assignments when discussing the configuration. Keep a record of each channel's source and destination.

Installation and Handling

Support the main cable and breakouts so equipment sockets do not carry the cable's weight. Avoid tight bends, pinching, and tension at breakout points. Leave enough access for connection and removal, release XLR latches where fitted, and disconnect by the connector body rather than pulling on the cable. Check every channel's routing and operation before putting the system into service.

Customization Help

If the website's configuration options do not cover your needs, call or email Performance Audio's custom cable specialists. Provide your equipment models, signal levels, required XLR genders, cable length, breakout reach, connector-clearance needs, and any special mapping, labeling, finishing, or wiring requests so we can confirm the build details. Confirm pricing and the build timeline before ordering if you have a deadline.