Yamaha EMX2 10-Input Powered Mixer

95% of 100
PA SKU # YAM EMX2 MFR # EMX2 UPC # 889025101332
  • Support Lifetime Tech Support!
  • Support 30 Day Returns!
  • Best Seller Best Seller!
  • Question Ask a Question
Only 2 Left! — In Stock & Ready to Ship Order now! Limited quantity in stock! Most orders placed before 3pm MST ship same day (except weekends and holidays).
  • Product Highlights
  • Integrated 500 W Power Amplifier
  • Four Mono Mic/Line Inputs
  • Three Stereo Inputs
  • Hi-Z Input on Channel 4
  • Independent Monitor Output
  • 3-Band EQ on Each Channel
  • Master EQ for Music Playback or Speech
  • Integrated Feedback Suppressor
  • Built-In Reverb
  • Compatible with 4 & 8 Ohm Speakers

10-Input Stereo Powered Mixer, 4 SPX Effects DSP, 2 x 250W @ 4 Ohms

Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's all-in-one design concept ensures that by just plugging in a single power cable and making a few simple, intuitive connections, anyone can be their own sound engineer.

Premium Portability
Despite being a mixer and an amplifier in a single unit, the EMX2's dimensions (37.5cm x 22cm x 15cm / 14.8" x 5.8" x 8.7") are surprisingly modest, making it easy to fit along with speakers even in the trunk of a small car. The lightweight body also features handles for a superior level of portability that will benefit anyone setting up a PA for applications where time is a consideration.

From Speaking Engagements to Live Bands and DJ Events
The EMX2's flexible connectivity allows you to use up to 4 microphones for singing along with musical instruments, or speaking/ making announcements along with BGM or recorded audio from a portable playback device. The unit also comes equipped with Phantom Power and high-impedance input capability allowing you to use high-performance condenser microphones or connect guitars directly without any external gear. And because the EMX2 is also an amplifier, you can easily connect passive speakers to complete your sound system, or even add a Yamaha DXS Series Powered sub-woofer via a single connection, for configuring a PA system for applications that require a more prominent bass performance, such as a DJ event in a small club or outdoor venue.

4 Yamaha Reverbs for Additional Atmosphere
For decades, the sound specialists at Yamaha have been developing high-quality reverb effects to add an atmospheric touch to our users vocal and instrumental performances. The EMX2 features someof the most commonly used and practical reverb algorithms, using a single knob to easily select and control the depth for one of four effects; HALL mimics the sound characteristics of a large hall, PLATE for a more classic, defined sound, ROOM adds a more intimate sound to performances, and ECHO gives instruments or vocal a more professional edge, as well as being an attractive option for KARAOKE.

A Positive Feedback Feature
Few things make a live performance or speaking engagement take a negative turn like the sudden, uncomfortable, and often embarrassing howling of unwanted feedback. Luckily the EMX2 comes equipped with a Feedback Suppressor that utilizes a unique Yamaha digital technology to instantly eliminate annoying feedback with the single switch of a button.

Shape Your Sound
For adding the final touch to your mix, the EMX2's 1-Knob Master EQ™ lets you apply optimized EQ settings with the simple turn of a knob. The SPEECH setting is geared towards meetings, seminars, or conferences with a limited lower end for clear, defined speech; MUSIC offers a more balanced sound tailored to acoustic or band performances; and BASS BOOST is ideal for DJ performances or audio playback that puts a priority on emphasizing the base sound.

Flexible Setup for a Diverse Range of Applications
Using an optional rack-mount kit, you can seamlessly add the EMX2 to a rack configuration or and existing installed application. You can even mount the EMX2 on a microphone stand using a simple mic-stand adaptor, giving you quick, convenient, manual control of all the relevant features.
  • 500-watt power amplifier for versatility in a wide variety of performance applications
  • Compatible with 4 Ohm and 8 Ohm speakers
  • 10-channel mixer with four mono mic/line and three stereo line input channels, supporting a wide range of inputs
  • Channel 4 offers a Hi-Z input for guitar
  • Independent monitor output
  • Yamaha's high-quality SPX reverb, providing optimum processing for instruments or vocals
  • Feedback Suppressor, which automatically cuts and prevents undesirable feedback noise
  • Independent three-band equalizer on each channel for tonal adjustment and sound control
  • Master EQ with setting for speech and music playback
  • I/O
  • Inputs: TOTAL 10ch : Mono (MIC/LINE): 4, Stereo(LINE): 3
  • Phantom power: CH1, 2 : +30 V
  • Control and others: FOOT SW : Effect Mute on/off
  • Bus: Stereo: 1, Effect: 1
  • Input Channel Function
  • PAD: 26 dB (CH1-4)
  • Hi-Z: Supported (CH4)
  • EQ HIGH: 8kHz +15dB / -15dB
  • EQ MID: 2.5kHz +15dB / -15dB
  • EQ LOW: 100Hz +15dB / -15dB
  • On-board processors
  • DSP: SPX Algorithm Reverb 4 programs, MASTER EQ (SPEECH to MUSIC), Feedback suppressor
  • On-board amplifiers
  • Maximum output power @4ohms: 1kHz THD+N less than 10% (CEA2006) : 250 W + 250 W, 1kHz THD+N less than 1% : 110 W + 110 W
  • Maximum output power @8ohms: 1kHz THD+N less than 10% (CEA2006) : 170 W + 170 W, 1kHz THD+N less than 1% : 110 W + 110 W
  • Level Meter: 6 points (-20, -6, 0 , +3, +6, LIMITER)
  • General specifications
  • Frequency response: Input to SPEAKERS : +1 dB/-4 dB (40Hz to 20kHz), Input to MONITOR OUT : +0.5 dB/-1.5 dB (20Hz to 20kHz) , refer to the nominal output level @ 1 kHz
  • Total harmonic distortion: Input to SPEAKERS : 0.2 % @ 13.8 W (40Hz to 20kHz), 0.4 % @ 23.2W (1kHz), Input to MONITOR OUT : 0.05 % @ +10 dBu (20Hz to 20kHz) 0.009 % @ +20 dBu (1kHz), (THD+N, Measured with 22 kHz LPF)
  • Hum & noise level
  • Equivalent input noise: -115 dBu
  • Residual output noise: Input to SPEAKERS : -68 dBu (40Hz to 20kHz, MASTER: min), Input to MONITOR OUT : -99 dBu (20Hz to 20kHz, MONITOR: min)
  • Crosstalk: -80 dB (1 kHz, Measured with 1 kHz band pass filter)
  • Protection circuit
  • Load protection: DC-fault
  • Amplifier protection: Over heat protection, Over current protection
  • Power requirements: AC 100-240V, 50Hz/60Hz
  • Power consumption: 35W (Idle) / 90W (1/8 Power)
  • Dimensions
  • W: 375 mm (14.8")
  • H: 147 mm (5.8")
  • D: 220 mm (8.7")
  • Net weight: 4.2 kg (9.3 lbs.)
  • Accessories: Owner's Manual, Technical Specifications, Power Cord (2m)
  • Options: Foot Switch: FC5, Mic Stand Adaptor: BMS-10A, Rack mount kit RK-EMX2
  • Others: Operating Temperature : 0 to +40°C
  • Analog Input Characteristics
  • Input Connectors: Channels 1/2: 2x XLR
  • Channels 3/4: 2x Combo XLR-1/4" / 6.35 mm
  • Channels 5/6: 2x 1/4" / 6.35 mm
  • Channel 7/8: 2x 1/4" / 6.35 mm or 2x RCA
  • Channel 9/10: 2x 1/4" / 6.35 mm or 1x 1/8" / 3.5 mm stereo mini-jack
  • Load Impedance: Channel 1-4 (XLR): 3 kOhms actual, 150 Ohms nominal with mics
  • Channel 3/4 (1/4", Hi-Z Engaged): 1 MOhms actual, 10 kOhms lines nominal
  • Channel 3/4 (1/4", Hi-Z Disengaged): 3 MOhms actual, 150 Ohms lines nominal
  • Channels 5/6 to 9/10: 10 kOhms actual, 150 Ohms lines
  • Input Level: Sensitivity
  • Channel 1-4 (XLR, Mic): -56 dBu (1.228 mV)
  • Channel 1-4 (XLR, Line): -30 dBu (24.51 mV)
  • Channel 3/4 (1/4", Mic): -50 dBu (2.451 mV)
  • Channel 3/4 (1/4", Line): -24 dBu (48.90 mV)
  • Channels 5/6 to 9/10: -24 dBu (48.90 mV)
  • Nominal
  • Channel 1-4 (XLR, Mic): -35 dBu (13.78 mV)
  • Channel 1-4 (XLR, Line): -9 dBu (275.0 mV)
  • Channel 3/4 (1/4", Mic): -29 dBu (27.50 mV)
  • Channel 3/4 (1/4", Line): -3 dBu (548.7 mV)
  • Channels 5/6 to 9/10: -3 dBu (548.7 mV)
  • Maximum Before Clip
  • Channel 1-4 (XLR, Mic): -10 dBu (245.1 mV)
  • Channel 1-4 (XLR, Line): +16 dBu (4.890 V)
  • Channel 3/4 (1/4", Mic): -4 dBu (489.0 mV)
  • Channel 3/4 (1/4", Line): +22 dBu (9.757 V)
  • Channels 5/6 to 9/10: +22 dBu (9.757 V)
  • Analog Output Characteristic
  • Output Connectors: Monitor L/R: 1/4" / 6.35 mm phone jack (impedance balanced)
  • Subwoofer Out: 1/4" / 6.35 mm phone jack (impedance balanced)
  • Impedance: Actual Source Impedance: 150 Ohms
  • For use with Nominal: 10 kOhms lines
  • Output Level: Monitor Out L/R: +4 dBu (1.23 V) nominal, +20 dBu (7.75 V) max before clip
  • Subwoofer Out: -3 dBu (0.55 V) nominal, +17 dBu (5.49 V) max before clip
Write Your Own Review
You're reviewing:Yamaha EMX2 10-Input Powered Mixer
Your Rating
Performance Audio, LLC BBB Business Review
Verified by Comodo Secure

We Accept Visa Credit/Debit Cards
We Accept American Express Credit/Debit Cards
We Accept Mastercard Credit/Debit Cards
We Accept Discover Credit/Debit Cards
We Accept PayPal Payments and Financing
We Accept Bank/Wire Transfers
We Offer Financing
Copyright © 2019. All rights reserved. Follow us on Facebook Follow us on Twitter Follow us on Instagram Follow us on YouTube Follow us on Pinterest