PA SKU # STU M75 MFR # M75
- Lifetime Tech Support
- Best Seller!
- Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
StudioComm 74&75 Create a 5.1 Surround Monitoring System with Talkback
StudioComm 74&75 Create a 5.1 Surround Monitoring System with Talkback
The StudioComm for Surround Model 74 Central Controller and Model 75 Control Console work together to provide 5.1 surround and stereo source monitoring capabilities, along with a full-featured headphone "talkback" cue system. The system is a perfect fit for contemporary facilities that need to perform a variety of audio tasks. These can include surround and stereo mixing and monitoring, live recording of voice, music, and sound effects, and on-air broadcast applications. The system's features were carefully selected to provide extensive capabilities while remaining simple to operate. Of overriding concern is maintaining the quality of the connected audio sources. This is accomplished using a combination of excellent circuit design and carefully selected components. The Model 74/Model 75 combination is ideal for adding surround monitoring capability to disk-based recording systems. It's also well suited for upgrading a post-production or broadcast facility to support multi-channel monitoring.
A complete StudioComm for Surround 74/75 system begins with the Model 75 Control Console, a compact user control surface that is intuitive and comfortable to use. It is designed to reside at the operator's location. The Model 75 connects to the Model 74 Central Controller using a single 9-pin cable. Occupying one rack space, the Model 74 provides all audio input and output circuitry, signal routing and control, and power supply functions. To complete the system up to four Model 35 Talent Amplifier modules can be added. These connect to the Model 74 using standard 3-pin XLR-type audio cables. Model 35 units are typically deployed in voice-over booths, studio areas, or other locations where voice or music talent needs access to a headphone cue feed. Each unit provides a stereo audio amplifier, user controls, and support for one or two pairs of headphones.
Model 75 Control Console
The Model 75 Control Console is a compact, self-contained unit designed to be located at the operator's position. It allows fingertip control of all monitoring and talkback parameters. Numerous LED indicators provide complete status information. A major strength of the Model 75 is its ability to configure, under software control, many of the operating parameters. All configuration parameters are stored in non-volatile memory. The Model 75 Control Console connects to, and is powered by, the Model 74 Central Controller. The Model 75 generates MIDI system-exclusive messages to control the Model 74. Remote-control signals connected to the Model 74 Central Controller are routed to the Model 75 via pins in the 9-pin interconnecting cable.
The Model 75 provides four buttons and associated LEDs for selection of the surround and stereo sources to be monitored. While in most cases only one input source will be monitored at a time, multiple inputs can be selected for simultaneous monitoring. This allows two, three, or all four of the inputs to be combined ("summed"). While there is no independent control of the input levels, this feature can be useful for creating rough mixes from the source signals. It is also a fast, effective means of making a "seat-of-the-pants" check on the phase relationship between synchronized signals.
The monitor output levels are controlled using a large, easy-to-use rotary control. The "curve" or "taper" of the level control can be configured to match an operator's preference. The choices available are true logarithmic and modified logarithmic. The level control auto mute all function allows the monitor output channels to mute automatically whenever the rotary level control is in its fully counterclockwise (minimum) position. This is useful in applications such as on-air broadcast. By using the reference level function, the monitor output level can be set to a pre-configured value. This is provided for audio-with-picture applications that require a specific monitor level. The reference level is easily configured by taking an electronic "snapshot" of the position of the rotary level control.
One button controls which monitor output, A or B, is active. For operator convenience, the dim function allows the monitor output level to be reduced by a fixed dB amount. The dim level is configured from four available levels. A mute all function allows all of the monitor output channels to be simultaneously muted. The mute/solo section provides individual output channel control. One pushbutton switch sets the operating mode for either mute or solo. In the mute mode, individual channels can be muted as required. In the solo mode, one channel can be monitored while the others are automatically muted. Depending on the configuration, multiple channels can be simultaneously selected for "soloing." The flexibility of having both mute and solo available allows an operator to quickly select the most comfortable and productive operating mode.
Two functions allow the format of the monitored sources to be checked for level or phase inconsistencies. The 5.1 to stereo downmix function is used to create a stereo signal from a 5.1 (surround) source. The stereo to mono downmix function allows a stereo signal to be added (summed) and monitored. The two downmix functions can be simultaneously enabled, allowing a surround signal to be checked for mono compatibility. The operating mode of the stereo to mono downmix function can be selected from two choices: mono-to-left-and-right or mono-to-center. This allows support for both music and audio-with-picture applications. A bandpass filter feature is associated with the stereo to mono downmix function. It is included to assist an operator in determining compatibility with "real world" playback environments. A bandpass filter can be inserted into the path of the mono signal, allowing the response of a monaural loudspeaker associated with an inexpensive television or portable radio to be simulated.
To support the headphone cue system functions the Model 75 Control Console includes three pushbutton switches and an integral microphone. As expected, one button is used to enable the talkback function. The other two buttons are used to set the talkback level over an 8-step range. These buttons are also used to select which audio source is routed to the headphones. Two choices are provided: the left and right channels of the source selected for the monitor output, or the left and right channels associated with Stereo B.
Typically the talkback button contained in the Model 75 will be used to initiate the talkback function. However, some applications may benefit from having remote activation of talkback. The system provides several ways of accomplishing this. In many cases the talkback button contained in the Model 75 will be used to initiate the talkback function. However, some applications may benefit from being able to remotely activate talkback. A hard-wired signal can be connected to the remote talkback input. In this way various types of external wired and wireless equipment can be interfaced. An infrared (IR) receiver module can also be directly connected. This allows the use of a wireless transmitter to enable talkback. The microphone contained within the Model 75 Control Console provides crisp, clear talkback audio. But some installations may benefit from using an alternate source of talkback audio. This capability is provided by the Model 74's line-level talkback audio input.
For flexibility, the system is designed to easily integrate with recording consoles, specialized playback systems, and audio-for-picture machine-control electronics. Four hard-wired remote-control input functions are provided: mute all, dim, talkback, and input select. By providing access to the StudioComm's mute all and dim functions, talkback or slate activity from an audio console or other communications system can control the monitor output level. The remote talkback input allows an externally provided contact closure or logic signal to control the talkback function. This allows easy integration with additional wired or wireless talkback devices. The remote input select function is provided expressly for audio post applications, allowing automatic switching of the StudioComm's input source whenever the mode of a recording system changes between playback and record. This function, referred historically as PEC/direct switching, allows accurate monitoring during dialog replacement, Foley, or other overdub sessions.
- Model 75 Control Console
- Application: supports Model 74 Central Controller
- Power: provided by Model 74 Central Controller
- Output Data: generates MIDI system-exclusive messages
- Connector: 9-pin D-subminiature female
- Dimensions (Overall):
- 7.2 inches wide (18.3 cm)
- 2.2 inches high (5.6 cm)
- 5.4 inches deep (13.7 cm)
- Weight: 1.8 pounds (0.82 kg)
Write Your Own Review
More from Studio Technologies