Shure A15AS In-line Switchable Attenuator

Switchable In-Line Attenuator (15, 20, 25 dB)

The Shure A15AS Switchable In-Line Attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB. It is specially suited to reducing the level of a high-output microphone to prevent it from overloading the microphone input of a mixer or recorder in applications with high sound pressure levels. In addition, the A15AS may be used to reduce the level of a line-level mixer output to prevent overloading the aux-level input of a recorder.

The A15AS is equipped with a female 3-pin XLR connector on the input side, and a male 3-pin XLR connector on the output side. Attenuation is controlled by a three-position slide switch. The A15AS allows phantom power to pass through from the mixer to the microphone, so it can be used with condenser microphones.

• Provides 15dB, 20dB or 25dB of microphone attenuation
• For use with all low-impedance and phantom-powered condenser microphones
• XLR input and output
• Full magnetic shield in a steel, gray enamel finished case