Saramonic SR-PAX2 Active 2-Channel Audio Adapter for DSLR Cameras

PA SKU # SAR SRPAX2 MFR # SR-PAX2 UPC # 4897040884853
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • Two 1/8″ (3.5 mm) mono inputs One stereo input
  • Two XLR Inputs
  • One 1/8 (3.5 mm) stereo output
  • Mono/Stereo switch (M/S)
  • Left and Right Channel Control Knobs
  • INPUT 1: 5V/OFF/3V; INPUT 2: 48V/OFF
  • LINE/MIC/PH switch
  • Level Meter Indicates the sound level in dB for each channel
  • Headphone jack to monitor the audio from microphones

SR-PAX2 2-Channel XLR and 1/8" (3.5mm) On-Camera Audio Adapter and Mixer with +48V Phantom Power Preamps, Headphone Output, Metering and Shoe Mount for DSLR and Mirrorless and Video Cameras

The Saramonic SR-PAX2 is a multi-channel mixer and microphone preamplifier that was designed to be used with compact mirrorless cameras and the Blackmagic Pocket Cinema Camera, but it works perfectly with DSLR and video cameras as well. The rear panel features two XLR inputs and three 1/8" (3.5mm) inputs. This makes it possible to connect professional microphones, audio mixers, consumer microphones, the headphone output of a smartphone - any combination of audio sources can be plugged into your camera and recorded with broadcast-quality sound.

The body of the PAX2 has an ergonomic design that doesn't inhibit how you handle your camera. The XLR inputs can provide condenser microphones with +48 volts of phantom power, or be switched to accept line-level signals from field mixers, DJ mixers, etc. The 1/8" (3.5mm) inputs can be set to provide two levels of plug-in power for microphones that need it, or none at all to save battery. The backlit meters display lets you easily see your audio levels and other information.

The PAX2 features a dedicated headphone jack so you can always monitor your sound, even when your camera lacks a headphone output. The top panel provides a tripod mount for your camera, and a handy wheel makes attaching and removing it a breeze. The base has another thread to attach the PAX2 to a tripod, and a 3/8" thread is also provided for additional mounting options. The entire right side is a female camera shoe mount, which is perfect for mounting a wireless microphone receiver or another piece of equipment. The PAX2 offers everything you need to capture pristine sound in any situation with a variety of cameras, and its all-metal construction is ready for the rigors of production.

  • Two XLR preamp inputs with +48V phantom power inputs and three 1/8" (3.5mm) preamp inputs with 5V / 3V plug-in power for mic and line level devices
  • Connect, adapt and mix any microphone or audio source to a variety of 1/8" (3.5mm) mini input cameras
  • A dedicated headphone output is provided so you can always hear your sound even when your camera lacks a headphone output
  • Can provide +48V phantom power to professional mics, and 5V / 3V plug-in power to consumer mics
  • Ergonomic design ideal for Mirrorless cameras and the Pocket Cinema Camera as well as DSLRs and Video Cameras
  • Inputs: 2 x XLR 3-pin and 3 x 1/8" (3.5 mm) TRS Mini Jacks (One Stereo, Two Mono)
  • Outputs: 1 x 1/8" (3.5 mm) TRS Stereo Mini Jack output, 1 x 1/8" (3.5 mm) TRS Stereo Mini Jack for headphone output
  • Frequency Response: 20 Hz to 20 kHz, ±0.5 dB
  • Total Harmonic Distortion: Less than 0.01% @ 1 kHz, -30 dBu input
  • Signal to Noise Ratio: 80 dB @ 1 kHz, -30 dBu input
  • Gain Inputs 1 & 2: Line: 0 dB, Mic/Phone: 20 dB
  • Phantom Power Inputs 1 1/8” (3.5mm): 5V / 3V power supply
  • Phantom Power Inputs 2 XLR Female: 48 V power supply
  • Level Meters: -18 dB to +3 dB in 3 dB increments
  • Power Requirements: 9V alkaline or lithium battery
  • Battery Duration: 5 hours, typical with alkaline battery, 3 hours, typical with lithium battery
  • Dimensions: (L x W x H) 5.4 x 3.2 x 2.5" (136.0 x 80.5 x 62.5 mm)
  • Weight: 13.5 oz (382.7 g)
  • 1 x Multi-channel audio mixer
  • 1 x Short, coiled 3.5mm output cable with gold-plated connectors
  • 1 x Printed manual
  • 1 x Warranty card
Write Your Own Review
You're reviewing:Saramonic SR-PAX2 Active 2-Channel Audio Adapter for DSLR Cameras
Your Rating