RDL FP-PEQ3 3 Band Parametric Equalizer

3-Band Parametric Equalizer - Terminal Blocks & RCA Phono Jacks

The FP-PEQ3 is the ideal choice in many applications where parametric equalization or acoustic notch filtering is needed. The FP-PEQ3 is a single-channel module featuring three identical independent filters. Each filter has separately adjustable FREQUENCY, BOOST/CUT amplitude, and bandwidth (BW) parameters. The FREQUENCY has three fully overlapping switch-selectable ranges: 15 Hz to 200 Hz, 150 Hz to 2 kHz, 1.5 kHz to 20 kHz. The BOOST/CUT provides a +/-15 dB range, switch-selectable to produce either cut or boost, making acoustic adjustment easier than with other parametric equalizers. Setting a given filter's BOOST/CUT to minimum completely removes that filter from the circuit. The bandwidth (BW) allows adjustment from 0.04 octave to 1.5 octave.

Features:

• Highly Versatile Parametric Equalizer
• Independent Adjustment Controls
• Adjustable Bandwidth .04 to 1.5 Octave
• Adjustable Frequency 15 Hz to 20 kHz
• Cut or Boost Adjustable +/- 15 dB
• Overlapping Frequency Bands
• Output Level Metering
• Studio Quality, Low-Noise Performance
• Convenience of RDL FLAT-PAKs

Specifications:

• Inputs (2)+4 dBu balanced on detachable terminalblock;
• -10 dBV unbalanced phono jack
• Input Impedance: 10 kΩ (balanced bridging); 10 kΩ (unbalanced)
• Gain: Off to +3 dB (adjustable)
• Outputs (2): +4 dBu balanced on plug-in terminal block;
• -10 dBV unbalanced phono jack
• Filters (3): Independently adjustable
• Frequency Range: 15 Hz to 200 Hz, 150 Hz to 2 kHz, 1.5 kHz to 20 kHz (adjustable) (switch-selectable ranges)
• Boost/Cut Amplitude: +/-15 dB adjustable
• Bandwidth: 0.04 octave to 1.5 octave (adjustable)
• Freq. Response (filters flat): 10 Hz to 20 kHz (+/- 0.25 dB)
• THD+N: < 0.005%
• Noise: < -90 dB (below +4 dB)
• CMRR: 50 dB @ 100 Hz (balanced input)
• Power Requirement: GROUND-REFERENCED, 24 Vdc @ 120 mA
• Dimensions:
• Height: 1.42 in. 3.61 cm
• Width: 3.25 in. 8.26 cm
• Length: 5.66 in. 14.38 cm