Atlas Sound TSD-ML11 1 x 1 Mic/Line Preamp

PA SKU # ATL TSDML11 MFR # TSD-ML11 UPC # 612079187829
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • 1 x 1 Mic/Line Preamp

1 x 1 Mic/Line Preamp

The TSD-ML11 high headroom, low noise mic preamp is perfect for use as a standalone preamp or in conference room systems, board meetings, courtrooms, council chambers, and public forum systems that need mute and push to talk microphone functions.

Unit features switchable phantom power for powering condenser microphones and has four EQ cut filters centered at common frequencies to eliminate feedback and control voice shaping. The variable mic preamp helps further eliminate noise for quiet operation as well as reduces unwanted coloration and changes in tonality and a 12dB @ 125Hz high pass filter is available on each mic input to minimize bass rumble and low frequency feedback in the system and ensure focus and clarity stays on voice sound spectrum. An output limiter/compressor is also included for system protection to avoid clipping and eliminate distortion. Mic Mute and Mic On control allows microphones in the system to be push-to-talk enabled or muted for speaker priority.
  • High Quality Microphone Preamp with Switchable 24V Phantom Power
  • Mic/Line I/O via Removable Phoenix Style Connector
  • Four (4) Preset Frequency Notch Filters For Tone and Feedback Control
  • 125Hz /12dB Low Cut Filter
  • Variable Output Limiter/Compressor
  • Mic Mute/Mic On Via Contact Closure
  • Input Signal & Peak Indicators
  • High Gain Output for Long Distance Signal Transmission
  • Separate Ground Connections
  • Security Covers Included for All Front Panel Controls
  • Meets Energy Star Standards
  • Input impedance: 1.2KΩ Balanced, 600Ω Unbalanced
  • Phantom Power: 24VDC Defeatable
  • Line Input Level: 1V (0dBV) Balanced 2V (+6dBV) Balanced Output
  • Mic Input Level: 46dB Gain 10mV (-40dBV) Balanced = 2V (+6dbV) Balanced Output
  • Output impedance: 300Ω Balanced, 150Ω Unbalanced
  • Line Output Level: 1V (0dBV) In = 2V (+6dBV)
  • Mic Output Level: 10mV (-40dBV) In = 80mV (-21dBV)
  • Frequency Response: 20Hz - 20kHz (+/-1dB)
  • THD: .06% & 1kHz
  • Signal to Noise Ratio Line to Line: 85dBV
  • Signal to Noise Ratio Mic to Line: 70dBV
  • Signal to Noise Ratio Line to Mic: 55dBV
  • Signal to Noise Ratio Mic to Mic: 55dBV
  • 24VDC Power Requirements: 100mA
  • Dimensions
  • Height: 1.5" (3.81 cm)
  • Width: 4" (10.16 cm)
  • Depth: 2.5" (6.35 cm)
  • Weight: 6oz., .165kg
Write Your Own Review
You're reviewing:Atlas Sound TSD-ML11 1 x 1 Mic/Line Preamp
Your Rating