RDL ST-DA3 Line Level Distribution Amplifier 1x3

$151.67
PA SKU # RDL STDA3 MFR # ST-DA3 UPC # 813721011022
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • Audio Distribution with up to 3 Outputs
  • Balanced or Unbalanced I/O
  • RF Protected I/O
  • Bridge an Audio Line for Local Distribution
  • Distribution with Impedance Conversion
  • Distribution with Gain or Loss
  • Use 2 Units for Stereo
  • RDL SupplyFlex Power Input Configuration

Line Level Distribution Amplifier - 1x3

The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known.

The ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.
  • Audio Distribution with up to 3 Outputs
  • Balanced or Unbalanced Input and Outputs
  • Bridge an Audio Line for Local Distribution
  • Distribution with Impedance Conversion
  • Distribution with Gain or Loss
  • Inputs and Outputs RF-Protected
  • 1x3 Mono or Use Two Units for Stereo
  • RDL SupplyFlex Power Input Configuration
  • Input: 20 kΩ balanced or unbalanced
  • Input Signal: -15 dBV to +21 dBu (for +4 dBu output)
  • Maximum Input Level: +24 dBu
  • Outputs (3): 150 Ω balanced or 75 Ω unbalanced
  • Output Signal
  • Balanced: +4 dBu nominal balanced;
  • Unbalanced: 6 dB below balanced line level
  • Maximum Output Level: +25 dBu
  • Frequency Response: 10 Hz to 100 kHz (+/- 0.05 dB)
  • THD+N: < 0.002% (unity gain)
  • IMD: < 0.003% (unity gain)
  • Noise below +4 dBu: < -98 dB (unity gain)
  • Headroom: > 20 dB (above +4 dBu)
  • Gain: Unity +/- 17 dB (adjustable)
  • CMRR: > 60 dB (50 Hz to 120 Hz)
  • Power Requirement: GROUND-REFERENCED or FLOATING, 24 Vdc @ 70 mA
Write Your Own Review
You're reviewing:RDL ST-DA3 Line Level Distribution Amplifier 1x3
Your Rating