Radio Design Labs HR-DAC1 Digital to Analog Converter

$512.82
PA SKU # RDL HRDAC1 MFR # HR-DAC1 UPC # 813721013279
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • Operation Up to 24 bits, 192 kHz
  • AES/EBU, AES3ID, & Coaxial S/PDIF Input
  • Balanced & Unbalanced Stereo Outputs
  • Adjustable Audio Output Gain Knobs
  • Made in the USA

Digital to Analog Audio Converter - 24 bit 192 kHz

The HR-DAC1 is the ideal choice in installations requiring high quality analog audio from an AES/EBU, AES-3ID or S/PDIF digital audio source. The HR-DAC1 automatically detects a valid input on any of the four input jacks: S/PDIF optical, S/PDIF coaxial, AES-3ID or AES/EBU. The AES/EBU input is 110 Ω terminated; the S/PDIF coaxial and AES-3ID jacks are 75 Ω terminated. A front-panel LOCK LED indicates the presence of a valid digital audio source without any phase-lock or bit errors. Sample rates from 32 kHz to 192 kHz are supported with front-panel LEDs to indicate standard digital audio rates of 44.1 kHz, 48 kHz, 96 kHz and 192 kHz. Professional operating stability is achieved with RDL's proprietary Sure-Lok latch-up auto recovery.

The digital input is converted to stereo audio using high speed delta-sigma conversion, digital filtering and filtered wideband analog drivers. The high performance, low-noise converters are supplemented with digitally controlled analog gating to produce unparalleled performance. The LEFT and RIGHT output levels are individually adjustable using front-panel knobs. A dual-LED VU meter displays the output level of each channel to facilitate level adjustments. Balanced +4 dBu audio outputs are provided on a rear-panel detachable terminal block and on XLR jacks. Unbalanced -10 dBV outputs are provided on phono jacks.

The HR-DAC1 is powered from 24 Vdc, which may be connected through the detachable terminal block or through the dc power jack. A front-panel power switch is provided.
  • Broadcast Quality Audio Digital to Analog Conversion
  • Input: AES/EBU, Coaxial or Optical S/PDIF, AES-3ID
  • Outputs: Balanced and Unbalanced Stereo Audio
  • Adjustable Audio Output Gain Trim
  • Dual-LED Audio Output Level VU Metering
  • Operation Up to 24 bits, 192 kHz
  • Exclusive Sure-Lok Auto-Recovery Sentinel
  • Transformer Isolated AES/EBU Input
  • Automatic Sample Rate Detection with Indicators
  • Digital Signal Lock Indicator for Valid Inputs
  • Inputs (4): 110 Ω AES/EBU XLR, transformer isolated; S/PDIF optical;
  • 75 Ω S/PDIF coaxial phono jack; 75 Ω AES-3ID BNC
  • Outputs (6): Left and Right: 150 Ω bal. XLR and terminal block, +4 dBu; -10 dBV unbal phono jack
  • Sample Rate: 32 kHz to 192 kHz
  • Resolution: 16 to 24 bits
  • Frequency Response: 5 Hz to 24 kHz (+/- 0.2 dB into high impedance load)
  • THD+N: < 0.002% (20 Hz to 20 KHz, below +22 dBu)
  • Harmonic attenuation: 2nd: -105 dB; 3rd: -108 dB; 4th, 6th: -115 dB;
  • 5th, 7th: -110 dB; above 7th: <-115 dB, typical
  • Crosstalk: < -100 dB (5 Hz to 3 kHz); < -90 dB (3 kHz to 20 kHz)
  • Output Level: Adjustable OFF to +24 dBu (0 dBFS); Left and Right
  • Phase L to R, R to L: +/-0.15 (5 Hz to 20 kHz)
  • Residual Noise: < -100 dB (10 to 20 kHz, -120 dBFS input)
  • < -100 dB (10 to 20 kHz, -120 dBFS input)
  • < -110 dB (locked to digital input, digital audio off)
  • Dynamic Range: > 110 dB (resolution 24-bit unweighted)
  • Indicators (10): POWER LED, blue; LOCK LED, green;
  • RATE: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz;
  • dual-LED VU meters, left and right
  • Standards: AES3-2003, IEC60958
  • Power Requirement: GROUND-REFERENCED
  • 24 Vdc @ 175 mA
  • Ambient Operating Environment: 0 C to 55 C
Write Your Own Review
You're reviewing:Radio Design Labs HR-DAC1 Digital to Analog Converter
Your Rating