RDL DS-AVMB2 Audio and Video Monitor BNC Panels (Stainless Steel)

$72.41
PA SKU # RDL DSAVMB2 MFR # DS-AVMB2 UPC # 813721014979
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • Product Highlights
  • DB15 to BNC Jacks
  • Stereo 1/8" Mini Jack
  • Detachable Terminal Block Output
  • Standard Decora Wall Plate
  • Fits WB-1U & WB-2U Wall Boxes
  • Stainless Steel Finish
Color White Stainless Steel

Audio and Video Monitor BNC Panels on Decora Wall Plate with 1/8" Mini Jack and DB15 to BNC Jacks - Stainless Steel

The D/S-AVMB2 is the ideal choice in installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors. The panel is typically installed as an audio/video input plate, but may equally be used as an output jack panel.

The front panel features a standard video monitor connector. Video components, video sync and their respective ground returns are separated to feed five BNC jacks on the rear panel. The BNC jacks are isolated from the module chassis ground so the appropriate signal grounds pass through without adding a video ground loop at the panel.

The front panel features a single stereo mini-jack, intended for stereo consumer line-level audio sources. The left and right signal inputs are fed to a rear-panel detachable terminal block. The audio signals are unbalanced and are intended for short wiring runs where balanced lines are not required.
  • Stereo Audio Input to Stereo Audio Output
  • Stereo Input on Mini-Jack
  • Unbalanced Audio Output on Detachable Terminal Block
  • Video Monitor Input on Standard Video Connector
  • Rear-Panel Video Outputs (R,G,B,H,V) on BNC Jacks
  • BNC Jacks are Isolated from Chassis Ground
  • Available in Stainless Steel
  • Audio input connector: Mini-jack 3.5 mm (Stereo)
  • Video input connector: Female DB15
  • Audio output connector: Detachable terminal block (Left and Right unbalanced audio)
  • Video output connectors (5): BNC (R: Red; G: Green; B: Blue; H: Horizontal Sync; V: Vertical Sync)
  • Dimensions: Height: 4.13 in. 10.49 cm
  • Width: 1.7 in. 4.32 cm
  • Depth: 1.4 in. 3.56 cm
  • Mounting Box Minimum Dimensions: Width: 1.80 in. 4.57 cm
  • Depth: 0.15 in. (0.38 cm) plus the depth of the installer-provided BNC connectors
Write Your Own Review
You're reviewing:RDL DS-AVMB2 Audio and Video Monitor BNC Panels (Stainless Steel)
Your Rating