Radio Design Labs DB-J2 Line Input Assembly (Black)

PA SKU # RDL DBJ2 MFR # DB-J2
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Only 1 Left! — In Stock & Ready to Ship Order now! Limited quantity in stock! Most orders placed before 3pm MST ship same day (except weekends and holidays).
  • Product Highlights
  • Stereo RCA Input Connectors
  • Terminal Block Output
  • Hum Cancellation
  • Transformer Isolation
  • Balanced Output
  • Standard Decora Wall Plate
  • Fits WB-1U & WB-2U Wall Boxes
  • Black Finish

Line Input Assembly on Decora Wall Plate - RCA Jacks, Terminal Block - Black Finish

The D-J2/DS-J2/RCX-J2 is a complete unbalanced audio input panel assembly. The front panel features two phono jacks intended for mono or stereo consumer level sources. LEFT and RIGHT are combined and balanced through audio transformers configured to reject induced hum. A balanced line-level output is provided on the rear-panel terminal block for connection to 10 kΩ or higher input impedance line level module or equipment inputs. The back of the D-J2/DS-J2/RCX-J2 is finished with a metal enclosure clearly labeled for easy installation.

The D-J2/DS-J2/RCX-J2 fits directly into back boxes, available from RDL to fit cabinets or US or international walls (RDL WB-1U). They may be mounted directly into cabinets or most standard US single gang electrical boxes.
  • Wall Mounted Line-Level Audio Input Panel
  • Gold Plated Phono Jacks
  • Hum Cancellation on Unbalanced Line Inputs
  • Transformer Isolation for Unbalanced Line Inputs
  • Balanced Output for Unbalanced Line Inputs
  • Input Connectors (2): Phono jacks with gold contacts
  • Output Connector: Terminal block
  • Output Connections (3): +, -, SHIELD
  • Frequency Response (line in): 30 Hz to 20 kHz (+/-1 dB)
  • Power Requirement: Passive
  • Overall Dimensions: Height: 4.88 in.(12.40 cm), Width: 3.39 in. (8.61 cm), Depth: 1.29 in. (3.28 cm)
  • Backbox Mounting Req.: Height: 2.73 in. (6.93 cm), Width: 1.80 in. (4.57 cm), Depth: 1.50 in. (3.81 cm)
  • Dimensions: Height: 4.13 in. 10.49 cm; Width: 1.7 in. 4.32 cm; Depth: 2.15 in. 5.47 cm
  • Mounting Box Req.: Width: 1.80 in. 4.57 cm; Depth: 1.75 in. 4.45 cm
Write Your Own Review
You're reviewing:Radio Design Labs DB-J2 Line Input Assembly (Black)
Your Rating
Performance Audio, LLC BBB Business Review
Copyright © 2019. All rights reserved. Follow us on Facebook Follow us on Twitter Follow us on Instagram Follow us on YouTube Follow us on Pinterest