{"product_id":"rdl-av-nl4-network-to-audio-interface","title":"RDL AV-NL4 Network to Audio Interface","description":"\u003cp\u003eDante to Four Channel Line\/Mic Audio Interface\u003c\/p\u003e\n\u003cp\u003eThe AV-NL4 is a line-level interface that converts four Dante network audio channels to four balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The AV-NL4 is a professional grade product for studio quality fidelity and low noise performance.\u003c\/p\u003e\n\u003cp\u003eThe AV-NL4 may be powered from an external 24 Vdc power supply, available separately. The AV-NL4 is equipped to operate from a PoE enabled network switch. The AV-NL4 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NL4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.\u003c\/p\u003e\n\u003cp\u003eThe AV-NL4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConverts Four Dante Network Audio Signals to Balanced Analog\u003c\/li\u003e\n\u003cli\u003eSelectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz\u003c\/li\u003e\n\u003cli\u003eEach Output Switch-Selectable for Mic or Line Level\u003c\/li\u003e\n\u003cli\u003eNormal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom\u003c\/li\u003e\n\u003cli\u003eMicrophone Output Level is Attenuated 50 dB\u003c\/li\u003e\n\u003cli\u003eEach Output is Protected Against Phantom Voltage up to 48 Vdc\u003c\/li\u003e\n\u003cli\u003eSpecial Software Not Required for Module Setup\u003c\/li\u003e\n\u003cli\u003eExceptional Low-Noise and Low-Distortion Performance\u003c\/li\u003e\n\u003cli\u003eHigh Resolution 24 Bit Digital to Analog Conversion\u003c\/li\u003e\n\u003cli\u003eLegendary RDL Analog Filtering Enhances Superb Audio Performance\u003c\/li\u003e\n\u003cli\u003eLED Indicator for Valid Power and Network Sync\u003c\/li\u003e\n\u003cli\u003eOperation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc\u003c\/li\u003e\n\u003cli\u003eMounts on a Microphone Stand using an RDL SF-MSM1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork Connector: RJ45 Neutrik etherCON-style\u003c\/li\u003e\n\u003cli\u003eDigital Audio Ethernet Protocol: Dante\u003c\/li\u003e\n\u003cli\u003eTransmission Rate: 100 Mbps\u003c\/li\u003e\n\u003cli\u003eSample Rates Supported: 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz\u003c\/li\u003e\n\u003cli\u003eBit Depth Supported: 24 bits\u003c\/li\u003e\n\u003cli\u003eAudio Operating Level: -20 dBFS = +4 dBu\u003c\/li\u003e\n\u003cli\u003eReference Level: 0 dBFS = +24 dBu\u003c\/li\u003e\n\u003cli\u003eOutputs (4): XLR (male)\u003c\/li\u003e\n\u003cli\u003eOutput Level (operating): +4 dBu nominal LINE level balanced; -45 dBu nominal MIC level (into 150 Ω)\u003c\/li\u003e\n\u003cli\u003eOutput Level (maximum): +24 dBu LINE level\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: \u0026lt; 100 Ω balanced\u003c\/li\u003e\n\u003cli\u003eSelector per output: Mic\/Line\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz (± 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eTHD+N: \u0026lt; 0.1% (20 Hz to 20 kHz,+4 dBu\/-20 dBFS); 0.015% at 1 kHz (typ)\u003c\/li\u003e\n\u003cli\u003eNoise: \u0026lt; -75 dB (below +4 dBu); \u0026lt; -95 (below +24 dBu)\u003c\/li\u003e\n\u003cli\u003eCrosstalk: Below Noise Floor (1 kHz, output to output); \u0026lt; -60 d5 dB (20 kHz)\u003c\/li\u003e\n\u003cli\u003eHeadroom above +4 dBu\/-20 dBFS: 20 dB\u003c\/li\u003e\n\u003cli\u003eIndicators (3): Ethernet Link and Speed (2, rear panel); Sync (front panel)\u003c\/li\u003e\n\u003cli\u003eAmbient Operating Environment: 0° C to 50° C\u003c\/li\u003e\n\u003cli\u003ePower Requirement: PoE Class 0, IEEE 802.3af, or 24 Vdc @ 150 mA, Ground-referenced\u003c\/li\u003e\n\u003cli\u003eSpecification Conditions: Gain\/Level: ± 1 dB\u003c\/li\u003e\n\u003cli\u003eDimensions: 5.19\" (13.18 cm) W; 1.68\" (4.27 cm) H; 5.97\" (15.16 cm) D\u003c\/li\u003e\n\u003cli\u003ePackage Type: Cardboard Box\u003c\/li\u003e\n\u003cli\u003ePackage Dimensions: 7 x 4.375 x 2.25 in.\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 1.77 lbs.\u003c\/li\u003e\n\u003cli\u003eWEEE weight: 1.525 lbs.\u003c\/li\u003e\n\u003cli\u003eTariff code: 8543.70.9100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42497301381298,"sku":"RDL AVNL4","price":690.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/products\/av-nl4.jpg?v=1753119342","url":"https:\/\/www.performanceaudio.com\/products\/rdl-av-nl4-network-to-audio-interface","provider":"Performance Audio","version":"1.0","type":"link"}