{"product_id":"dpa-microphones-4060-omnidirectional-boundary-layer-microphone-silver-and-black","title":"DPA Microphones 4060 Omnidirectional Boundary Layer Microphone (Silver and Black)","description":"\u003cp\u003e4060 Omnidirectional Boundary Layer Microphone\u003c\/p\u003e\n\u003cp\u003eThe 4060 Omni Mic is the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. This microphone handles sound pressure levels up to 134 dB before clipping occurs. This mic is well suited for applications where the sound source is more remote or damped and you need to have a good balance signal versus noise.\u003c\/p\u003e\n\u003cp\u003eThis mic solution is ideal for use in boardrooms, conference facilities, and courtrooms. It is also a great solution for teleconferencing and other applications where excellent vocal pickup is required.\u003c\/p\u003e\n\u003cp\u003eThe 4060 Omni Boundary Layer Mic is a transducer designed to work under optimum conditions when placed on a tabletop, but it also performs well on any other hard, flat surface that reflects sound.\u003c\/p\u003e\n\u003cp\u003eThe microphone is a pre-polarized omnidirectional miniature condenser microphone with a 5.4 mm (0.2 in) vertical diaphragm. The mic body consists of a central rubber disc that holds the mic element mounted in an elegant stainless steel base.\u003c\/p\u003e\n\u003cp\u003eThe 4060 Omni Boundary Layer Mic can be very easily placed in essentially any position on the surface of a table, even close to the edge. Users will benefit from the special characteristics of the surrounding sound field on which the mic is mounted: a 6 dB gain of direct sound and only a 3 dB gain of the diffuse sound. The sound captured has both greater clarity, especially at high frequencies, and speech intelligibility compared to sound captured above the surface.\u003c\/p\u003e\n\u003cp\u003eThe 4060 Omni Boundary Layer Mic uses CORE by DPA technology and features two M5 threaded holes on the backside of the unit, which means that it can be permanently affixed to the table. Furthermore, the slim cable can be run either through or along the table.\u003c\/p\u003e\n\u003cp\u003eA wide range of connection adapters and power supplies makes it possible to use the 4060 Omni Boundary Layer Mic with any microphone input. It is delivered with a DAD6001 XLR Adapter, but as the supplied cable is terminated with a DPA MicroDot connector this microphone can be connected to a wireless system via the flexible adapter system.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for use in boardrooms and conference facilities\u003c\/li\u003e\n\u003cli\u003eSleek low profile Scandinavian Design\u003c\/li\u003e\n\u003cli\u003eOptimized to boost speech intelligibility\u003c\/li\u003e\n\u003cli\u003eModular adapter system fits most professional wireless systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirectional pattern: Omnidirectional, hemisphere\u003c\/li\u003e\n\u003cli\u003ePrinciple of operation: Pressure\u003c\/li\u003e\n\u003cli\u003eCartridge type: Pre-polarized condenser\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eEffective frequency range ±2 dB: 20 Hz - 14 kHz, with 7 dB soft boost at 8 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity, nominal, ±3 dB at 1 kHz: 20 mV\/Pa; -34 dB re. 1 V\/Pa\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))\u003c\/li\u003e\n\u003cli\u003eEquivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)\u003c\/li\u003e\n\u003cli\u003eDistortion, THD \u0026lt; 1%: 126 dB SPL RMS, 129 dB SPL peak\u003c\/li\u003e\n\u003cli\u003eDynamic range: Typ. 106 dB\u003c\/li\u003e\n\u003cli\u003eMax. SPL, THD 10%: 134 dB SPL peak\u003c\/li\u003e\n\u003cli\u003eRated output impedance: From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω\u003c\/li\u003e\n\u003cli\u003eCable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003ePower supply (for full performance):\u003cbr\u003eFor wireless systems Min. 5 V - max. 10 V through DPA adapter\u003cbr\u003eWith DAD6001-BC: P48 (Phantom Power). Will work from 12 V\u003c\/li\u003e\n\u003cli\u003eCurrent consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter\u003c\/li\u003e\n\u003cli\u003eConnector: MicroDot or XLR 3-pin\u003c\/li\u003e\n\u003cli\u003eWeight: 240 g (8.5 oz) excl. Cable\u003c\/li\u003e\n\u003cli\u003eMicrophone diameter: 12 mm (0.47 in)\u003c\/li\u003e\n\u003cli\u003eMicrophone length: 100 mm (4 in)\u003c\/li\u003e\n\u003cli\u003eCable length: 3 m (10 ft)\u003c\/li\u003e\n\u003cli\u003eCable diameter: 1.6 mm (0.06 in)\u003c\/li\u003e\n\u003cli\u003ePolarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001-BC XLR adapter)\u003c\/li\u003e\n\u003cli\u003eTemperature range: -40°C to 45°C (-40°F to 113°F)\u003c\/li\u003e\n\u003cli\u003eRelative humidity (RH): Up to 90%\u003c\/li\u003e\n\u003cli\u003eColors: Black rubber disc mounted in stainless steel base\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DPA Microphones","offers":[{"title":"Default Title","offer_id":46738916966578,"sku":"DPA 4060OCDS01002","price":935.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/files\/4060-oc-d-s01-002-omni-mic-silver-and-black-microdot-boundary-layer-4k.jpg?v=1763586615","url":"https:\/\/www.performanceaudio.com\/products\/dpa-microphones-4060-omnidirectional-boundary-layer-microphone-silver-and-black","provider":"Performance Audio","version":"1.0","type":"link"}