{"product_id":"crown-cdi-drivecore-4-300bl-power-amplifier","title":"Crown CDi DriveCore 4|300BL 4-Channel Power Amplifier with BLU Link (300W)","description":"\u003cp\u003eCDi DriveCore Series Four-Channel Power Amplifier, Analog + BLU Link Input, 300W Per Output Channel\u003c\/p\u003e \u003cp\u003eThe CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|300BL offers streamlined functionality to work in almost any small\/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4|300BL is a 4-channel amp that includes network control\/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The 4|300BL also comes with BLU link, adding the ability to send and receive channels over HARMAN's digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.\u003c\/p\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriveCore Technology\u003c\/strong\u003e - Crown's proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Control and Monitoring\u003c\/strong\u003e - Through Harman's HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP\/IQ network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP\u003c\/strong\u003e - On-board Digital Signal Processor in each amplifier allows for custom configuration\u003cbr\u003eInput Router\u003cbr\u003eInput Delay - Up to 1000ms\u003cbr\u003eInput Parametric EQ - 8 band\u003cbr\u003eCrossover\u003cbr\u003eOutput Parametric EQ - 8 band\u003cbr\u003eOutput Delay - Up to 100ms\u003cbr\u003eLevelMAX Limiter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBLU link (BL models only)\u003c\/strong\u003e - Both receive and send channels over HARMAN's 256 channel, fault-tolerant audio BUS, BLU link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Drive 70\/100Vrms Output\u003c\/strong\u003e - Each output channel is capable of provide either 70V or 100V for high impedance applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Panel Interface\u003c\/strong\u003e - Completely configure the amplifier using an intuitive front-panel interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO\/AUX Port\u003c\/strong\u003e - Recall presets, mute channels, monitor faults, power on\/off the amplifier, and more through a combined GPIO\/AUX Port.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBLU link: Yes\u003c\/li\u003e\n\u003cli\u003eChannels: 4\u003c\/li\u003e\n\u003cli\u003eSensitivity (for full rated power at 8 ohms): 0.7V RMS\u003c\/li\u003e\n\u003cli\u003eRated Power Output (per channel @ 4 ohms): 300W\u003c\/li\u003e\n\u003cli\u003eAnalog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms): \u0026gt; 104dB\u003c\/li\u003e\n\u003cli\u003eTHD (full rated power, 20 Hz - 20 kHz): 0.35%\u003c\/li\u003e\n\u003cli\u003eDamping Factor (20 Hz to 100 Hz): \u0026gt; 1000\u003c\/li\u003e\n\u003cli\u003eFrequency Response (8Ω, 20 Hz - 20 kHz): +\/-0.5dB\u003c\/li\u003e\n\u003cli\u003eCrosstalk (below rated power) 20 Hz to 1 kHz: \u0026gt; 80dB\u003c\/li\u003e\n\u003cli\u003eInput Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unblanced\u003c\/li\u003e\n\u003cli\u003eDimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 12.25\u003c\/li\u003e\n\u003cli\u003eWeight: 16.13 lbs (7.31 kg)\u003c\/li\u003e\n\u003cli\u003ePower Supply Connector: \"Standard IEC type 320 inlet for detachable connector 100 - 240V~\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIncludes:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCrown CDi DriveCore 4|300BL 4-Channel Power Amplifier with BLU Link (300W)\u003c\/li\u003e\n\u003cli\u003e2 x Terminal Block\u003c\/li\u003e\n\u003cli\u003ePower Cord\u003c\/li\u003e\n\u003cli\u003eLimited 3-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Crown","offers":[{"title":"Default Title","offer_id":42490859618482,"sku":"CRN CDI4X300BL","price":3528.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/products\/crown_cdi_drivecore_4300bl_front_high_original.jpg?v=1665636870","url":"https:\/\/www.performanceaudio.com\/products\/crown-cdi-drivecore-4-300bl-power-amplifier","provider":"Performance Audio","version":"1.0","type":"link"}