{"product_id":"ashly-nxe1-54-network-power-amplifier-4-x-1500w","title":"Ashly nXe1.54 Network Multi-Mode Power Amplifier (4 x 1500W)","description":"\u003cp\u003eMulti-Mode Network Power Amplifier, Ethernet, 4 x 1,500 Watts @ 2 Ohms\u003c\/p\u003e \u003cp\u003eWith NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.\u003c\/p\u003e \u003cp\u003eChoose from 2 and 4 channel models with 3000, 1500, 800, 400 Watts per channel. Simply set the DIP-switch configuration to the desired mode: Low Impedance (2, 4, and 8 Ohm), or Constant Voltage (70V or 100V) and you're set to go.\u003c\/p\u003e \u003cp\u003eAvailable in three product families, nX is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. When you choose Ashly nX, you choose a hand-built, US-made product backed by our team of engineers and an industry-leading 5-year warranty.\u003c\/p\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSelectable 80Hz Hipass filter, limiter, and input gain per channel, via rear panel\u003c\/li\u003e\n\u003cli\u003eRemote DC level control per channel\u003c\/li\u003e\n\u003cli\u003eExtensive protection circuitry, continuously variable cooling fans\u003c\/li\u003e\n\u003cli\u003eEthernet port for software control and monitoring of amplifier functions, with front panel COM activity LED\u003c\/li\u003e\n\u003cli\u003eSerial data port available for Ashly WR-5 and RD-8C programmable remote control (op onal RS-232 converter INA-1 available for third party controllers)\u003c\/li\u003e\n\u003cli\u003eInstant Standby Mode, 30% reduction in idle power consumption, triggered by contact closure, software control, or event scheduler\u003c\/li\u003e\n\u003cli\u003ePreset recall via contact closure, software control, remote control, or event scheduler\u003c\/li\u003e\n\u003cli\u003eProgrammable power-on delay\u003c\/li\u003e\n\u003cli\u003eAux preamp line outputs for driving other amplifiers\u003c\/li\u003e\n\u003cli\u003eFault condition logic outputs, per channel\u003c\/li\u003e\n\u003cli\u003eNeutrik Combo XLR 1\/4\" TRS jack plus Euroblock input connectors\u003c\/li\u003e\n\u003cli\u003eNeutrik speakON twist locking loudspeaker connectors\u003c\/li\u003e\n\u003cli\u003eNeutrik powerCON detachable AC mains connector\u003c\/li\u003e\n\u003cli\u003eSafety\/Compliance: cTUVus, CE, FCC, RoHS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVoltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V\u003c\/li\u003e\n\u003cli\u003eDamping Factor: \u0026gt;250 (8 Ohms load \u0026lt;1kHz)\u003c\/li\u003e\n\u003cli\u003eInput High Pass Filter: 80Hz 2nd order\u003c\/li\u003e\n\u003cli\u003eDistortion (SMPTE, typical): \u0026lt;0.5%\u003c\/li\u003e\n\u003cli\u003eDistortion (THD-N, typical): \u0026lt;0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)\u003c\/li\u003e\n\u003cli\u003eChannel Separation: -75dB (dB from full output, 1kHz)\u003c\/li\u003e\n\u003cli\u003eSignal-to-Noise (20Hz-20kHz, unweighted):\u003cbr\u003e\u0026gt;114dB (all 3.0x models)\u003cbr\u003e\u0026gt;111dB (all 1.5x models)\u003cbr\u003e\u0026gt;108dB (all 800x models)\u003cbr\u003e\u0026gt;105dB (all 400x models)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20Hz-20kHz, +\/-0.05dB\u003c\/li\u003e\n\u003cli\u003eBalanced Input Connector: Euroblock 3.5mm, 1\/4\" TRS and XLR Combo jack\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 10k Ohms\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +21dBu\u003c\/li\u003e\n\u003cli\u003eSpeaker Output Connector: Neutrik speakON\u003c\/li\u003e\n\u003cli\u003eControl Network: Compatible w\/ standard 100MB Ethernet\u003c\/li\u003e\n\u003cli\u003eAUX Output Connector: Balanced Euroblock 3.5mm\u003c\/li\u003e\n\u003cli\u003eAUX Output Maximum Level: +21dBu\u003c\/li\u003e\n\u003cli\u003eRemote Standby Contact Closure: Euroblock 3.5mm, close contact to GND for standby mode\u003c\/li\u003e\n\u003cli\u003ePreset Recall Contact Closure: Euroblock 3.5mm, close contact to GND for preset 1-4 recall\u003c\/li\u003e\n\u003cli\u003eData Connection: Euroblock 3.5mm - Gnd, +18V, In, Out\u003c\/li\u003e\n\u003cli\u003eFault Condition Logic Outputs: Fault indicated by loss of 1Hz \"heartbeat\" pulse signal\u003c\/li\u003e\n\u003cli\u003eRemote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input\u003c\/li\u003e\n\u003cli\u003eAttenuators (per channel): Front panel, software, offset link group, and remote. Fully off = Mute\u003c\/li\u003e\n\u003cli\u003eAmplifier Protection: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses\u003c\/li\u003e\n\u003cli\u003eCooling: Continuously variable temperature controlled axial fan(s)\u003c\/li\u003e\n\u003cli\u003eEnvironmental: 32-113 deg F, (0-45 deg, C) (noncondensing)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ePower Requirements (@ 50\/60Hz)\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eNominal (Automatic Sensing SMPS): 120VAC, 240VAC\u003c\/li\u003e\n\u003cli\u003eOperating Range: 70-135VAC, 140-270VAC\u003c\/li\u003e\n\u003cli\u003eMinimum power-up: 85VAC, 170VAC\u003c\/li\u003e\n\u003cli\u003ePower Cable Connector: 20A powerCON (32A powerCON 3.04 model only)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eWeights and Dimensions\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eUnit Weight: 1.54\/3.04:28.7lbs(13kg) 1.52\/3.02:22.7lbs(10.3kg) 4002\/8002:22.2lbs(10.1kg) 4004\/8004:25.9lbs(11.7kg)\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 1.54\/3.04:35.2lbs(16kg) 1.52\/3.02:29.2lbs(13.3kg) 4002\/8002:28.7lbs(13.1kg) 4004\/8004:32.4lbs(14.8kg)\u003c\/li\u003e\n\u003cli\u003eUnit Dimensions (all models): 19\"W x 3.5\"H x 16.84\"D (483mm x 89mm x 428mm)\u003c\/li\u003e\n\u003cli\u003eShipping Dimensions: 24.5\"W x 22\"H x 5.25\"D (622mm x 559mm x 133mm)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eFront Panel LED Indicators\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003ePOWER (white): Switch: On, Off, Standby (flashing)\u003c\/li\u003e\n\u003cli\u003ePROTECT (red): On (fault condition or shut down), Off\u003c\/li\u003e\n\u003cli\u003eSLEEP (blue): On, amplifier is asleep from audio inactivity\u003c\/li\u003e\n\u003cli\u003eDISABLE (yellow): On, power switch \u0026amp; front panel attenuators are disabled\u003c\/li\u003e\n\u003cli\u003eCOM (green): On, for Ethernet data or Device ID\u003c\/li\u003e\n\u003cli\u003ePer Channel\u003c\/li\u003e\n\u003cli\u003eCLIP\/MUTE (red): Clip @ 1dB below full output \/ Mute\u003c\/li\u003e\n\u003cli\u003eSIGNAL (green): -18dB below rated output\u003c\/li\u003e\n\u003cli\u003eCURRENT (green): Proportional to output\u003c\/li\u003e\n\u003cli\u003eTEMP (yellow): On dim at 90% max operating temperature, full bright + protect at 100%\u003c\/li\u003e\n\u003cli\u003eBRIDGE (green): On, Off\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ashly","offers":[{"title":"Default Title","offer_id":42490292601010,"sku":"ASH NXE154","price":4269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/8122\/2322\/products\/58430_sq.jpg?v=1665617436","url":"https:\/\/www.performanceaudio.com\/products\/ashly-nxe1-54-network-power-amplifier-4-x-1500w","provider":"Performance Audio","version":"1.0","type":"link"}