Powersoft T602 2-Channel Power Amplifier with DSP and Dante (1300W per Channel)

PA SKU # PWR T602 MFR # T602
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • 2-Channel High-Performance Amplifier Platform with DSP and Dante

Model: T602 T302 T304 T602 T604

2-Channel High-Performance Amplifier Platform with DSP and Dante

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The T Series is Powersoft's newest addition to its touring line of amplifier platforms, designed to deliver cost-effective, high-quality performance loudspeaker processing. Available in both 4-channel and 2-channel, both versions support channel powers from 750 W to 3,000 W.

In addition to analog, the T Series includes AES3 and Dante by Audinate inputs, which are optimized for daisy-chained distribution of 2-channel audio to multiple amplifiers with no need for external switches or splitters. The T Series also allows remote control and advanced signal processing abilities through Powersoft's ArmoníaPlus, plus onboard DSP.

  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
  • Full control with a PC running Armonía. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
  • Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Very long FIR filters (42.6 ms)
  • Control and monitoring through ArmoníaPlus
  • General
  • Number of channels: 2
  • Output power: Single channel mode: Bridge mode
  • 2 Ω: 4 Ω: 8 Ω: 4 Ω: 8 Ω
  • 3000 W: 2500 W: 1300 W: 6000W: 5000W
  • Max output voltage / current: 145 Vpeak: / 100 Apeak
  • AC Main Power
  • Power supply: Universal, regulated switch mode
  • Nominal power requirement: 100-240 V ±10%, 50-60 Hz
  • Operating voltage: 90 V - 264 V
  • Power consuption**: 115 V: 230 V
  • Idle: 32 W: 32 W
  • 1/8 of max output power @ 4 Ω: 824 W: 7.6 A: 839 W: 4.3 A
  • Thermal
  • Operating temperature range: 0º - 45º C - 32º - 113º F
  • Thermal dissipation**: 115 V: 230 V
  • 1/8 of max output power @ 4 Ω: 678 BTU/h: 170.9 kcal/h: 731 BTU/h: 184.2 kcal/h
  • Gain: 32dB
  • Input sensitivity: 2.57 Vrms
  • Max input level: 24dBu
  • Frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
  • S/N ratio: > 110 dB (20 Hz - 20 kHz, A weighted)
  • Crosstalk separation: <-70 dB @ 1kHz
  • THD+N: < 0.1% (typical < 0.5%)
  • IMD: < 0.1% (typical < 0.5%)
  • Input impedance: 20 kΩ balanced
  • DSP
  • AD Converter: 24 Bit Tandem @ 48 kHz 125 dB-A Dynamic Range - 0.005% THD+N
  • DA Converter: 24 Bit Tandem @ 48 kHz 117 dB-A Dynamic Range - 0.003% THD+N
  • Memory/presets: 256 MB (RAM) plus 512 MB flash for presets: /
  • Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  • Crossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
  • Delay: 2 s (input) + 100 ms (output) for time alignment
  • Limiters: TruePower, RMS voltage, RMS current, Peak limiter
  • Damping control: Active DampingControl and LiveImpedance measurement
  • Front panel
  • Indicators and Controllers: 8 x Push-button - Setting operating parameters
  • 1 x Display - Settings and monitoring
  • 1 x Power switch -
  • Connectors
  • AC main: 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
  • Audio signal input: 2 x XLR - Signal input
  • Loudspeakers: 2 x speakON - Neutrik NL4MD
  • Network/data: 1 x Rj45 socket - RS485 data connection (non-DSP version)
  • 1 x Rj45 socket - DANTE
  • Construction
  • Dimensions (L x H x W): 484 mm x 44.5 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
  • Weight: 7.5 kg (16.5 lb)
Write Your Own Review
You're reviewing:Powersoft T602 2-Channel Power Amplifier with DSP and Dante (1300W per Channel)
Your Rating