Powersoft T302 2-Channel Power Amplifier with DSP and Dante (1200W per Channel)

$2,705.00
PA SKU # PWR T302 MFR # T302
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Order Now! We'll Ship It Fast! This item is currently out of stock. Most out of stock orders ship within just a few days (excluding weekends and holidays). We'll keep you up to date the whole way.
  • 2-Channel High-Performance Amplifier Platform with DSP and Dante

Model: T302 T302 T304 T602 T604

2-Channel High-Performance Amplifier Platform with DSP and Dante

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The T Series is Powersoft's newest addition to its touring line of amplifier platforms, designed to deliver cost-effective, high-quality performance loudspeaker processing. Available in both 4-channel and 2-channel, both versions support channel powers from 750 W to 3,000 W.

In addition to analog, the T Series includes AES3 and Dante by Audinate inputs, which are optimized for daisy-chained distribution of 2-channel audio to multiple amplifiers with no need for external switches or splitters. The T Series also allows remote control and advanced signal processing abilities through Powersoft's ArmoníaPlus, plus onboard DSP.

The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.

Full control with a PC running Armonía. Here it can be in mixed groups with advanced EQ together with other Powersoft products.

Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.

Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.

Group controllable advanced EQ with raised cosine filters

Large preset library

Preset compatibility with X Series

Very long FIR filters (42.6 ms)

Control and monitoring through ArmoníaPlus

  • General
  • Number of channels: 2
  • Output power: Single channel mode: Bridge mode
  • 2 Ω: 4 Ω: 8 Ω: 4 Ω: 8 Ω
  • 1500 W: 1500 W: 1200 W: 3000W: 3000W
  • Max output voltage / current: 145 Vpeak: / 50 Apeak
  • AC Main Power
  • Power supply: Universal, regulated switch mode
  • Nominal power requirement: 100-240 V ±10%, 50-60 Hz
  • Operating voltage: 90 V - 264 V
  • Power consuption**: 115 V: 230 V
  • Idle: 23 W: 23 W
  • 1/8 of max output power @ 4 Ω: 517 W: 4.6 A: 527 W: 2.7 A
  • Thermal
  • Operating temperature range: 0° - 45° C - 32° - 113° F
  • Thermal dissipation**: 115 V: 230 V
  • 1/8 of max output power @ 4 Ω: 485 BTU/h: 122.2 kcal/h: 517 BTU/h: 130.3 kcal/h
  • AUDIO
  • Gain: 32dB
  • Input sensitivity: 2.57 Vrms
  • Max input level: 24 dBu
  • Frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
  • S/N ratio: > 110 dB (20 Hz - 20 kHz, A weighted)
  • Crosstalk separation: < -70 dB @ 1kHz
  • THD+N: < 0.1% (typical < 0.5%)
  • IMD: < 0.1% (typical < 0.5%)
  • Input impedance: 20 kΩ balanced
  • DSP
  • AD Converter: 24 Bit Tandem @ 48 kHz 125 dB-A Dynamic Range - 0.005 % THD+N
  • DA Converter: 24 Bit Tandem @ 48 kHz 117 dB-A Dynamic Range - 0.003 % THD+N
  • Memory/presets: 256 MB (RAM) plus 512 MB flash for presets: /
  • Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  • Crossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
  • Delay: 2 s (input) + 100 ms (output) for time alignment
  • Limiters: TruePower, RMS voltage, RMS current, Peak limiter
  • Damping control: Active DampingControl and LiveImpedance measurement
  • Front panel
  • Indicators and Controllers: 8 x Push-button - Setting operating parameters
  • 1 x Display - Settings and monitoring
  • 1 x Power switch -
  • Connectors
  • AC main: 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
  • Audio signal input: 2 x XLR - Signal input
  • Loudspeakers: 2 x speakON - Neutrik NL4MD
  • Network/data: 1 x Rj45 socket - RS485 data connection (non-DSP version)
  • 1 x Rj45 socket - DANTE
  • Construction
  • Dimensions (L x H x W): 484 mm x 44.45 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
  • Weight: 6.7 kg (14.8 lb)
Write Your Own Review
You're reviewing:Powersoft T302 2-Channel Power Amplifier with DSP and Dante (1200W per Channel)
Your Rating