-
Lifetime Tech Support
-
Best Seller!
-
Ask a Question
- Product Highlights
- Watertight, Dust, & Crushproof Case
- Made of Super-Light Polymer
- Pick-n-Pluck Foam
- ABS Double-Throw Latches
- Watertight O-Ring Gasket
- Built-In Purge Valve
- Stainless Steel Hasp Protectors
- Conic-Curved Lid Shape & Wheels
- Overmolded Handles & Trolley Handle
- Polycarbonate Card Holder
1535Air Wheeled Carry-On Case with Pick-n-Pluck Foam, Black
Combining strength and lightness, the 1535 Air Wheeled Carry-On Case with Pick-n-Pluck Foam 2017 in black from Pelican is watertight, crushproof, dustproof, and optimized for travel. For travel by air, Pelican has aggregated available airline rules for maximum overhead and check-in dimensions with the goal of creating a case that conforms to their requirements. Of course, there will always be exceptions, so it's wise to contact your carrier before departing.
Your 1535 Air case is made of a super-light, proprietary HPX polymer (with honeycomb structural elements) that is up to 40% lighter than most other Pelican polymers. This confidence-inspiring design has been drop-tested on concrete on all sides and corners while loaded with gear. The case is also tested with a 28-pound steel dart dropped from a height of three feet, submerged for 30 minutes at a depth of 3.3 feet, and the wheels are roll tested over 1000 yards with loads at 5 mph.
The case has ABS double-throw latches that accept a user-supplied padlock, a watertight O-ring gasket, an automatic purge valve, and stainless steel hasp protectors. Users will appreciate the conic-curved lid shape, the rubber overmolded handles, and the extending trolley handle. For easy case identification, a removable polycarbonate card holder may be placed on the front or side of the case.
Organizing equipment is an easy and straightforward operation with the Pick-n-Pluck foam interior. Simply arrange the gear you wish to carry on the foam, try a variety of placements, and when you're satisfied, remove pieces of foam until items fit to your satisfaction.
- Material: Body: HPX Polypropylene Blend Polymer
- Latch: ABS
- O-Ring: EPDM
- Purge Body: ABS
- Purge Vent: Hi-Flow Gore-Tex 3-Micron Hydrophobic Non-Woven
- Purge O-Ring: 70 Shore Nitrile
- Waterproofing: Watertight O-Ring Gasket
- Maximum Buoyancy: Floats in Salt Water with 64.8 lb / 29.4 kg
- Temperature Range: 0 - 140ºF / -18 - 60ºC
- Type of Closure: Hinged with Double ABS Latches
- Interior Fitting: Pick-N-Pluck foam
- Carrying/Transport Options: Overmolded Handle, Extending Trolley Handle, and Wheels
- Volume: 7.1 gal / 26.9 L
- Interior Dimensions: Overall: 20.39 x 11.2 x 7.21" / 51.8 x 28.4 x 18.3 cm
- Bottom Depth: 5.21" / 13.2 cm
- Lid Depth: 2" / 5.1 cm
- Exterior Dimensions: 21.96 x 13.97 x 8.98" / 55.8 x 35.5 x 22.8 cm
- Weight: 9.98 lb / 4.53 kg